Recent content by ViniciusCaetano

  1. V

    IPC Cam power while in NVR but not in PoE Switch

    Hi, folks. I changed the switch and the camera was powering. So when I returned to the first switch, it worked normally. Thanks!
  2. V

    IPC Cam power while in NVR but not in PoE Switch

    I tried this, I reseted the camera and switch to factory settings, changed ports, cables, tried other cameras (worked) but not with this specific camera. I have other switch like this, i will test on it and return for you.
  3. V

    IPC Cam power while in NVR but not in PoE Switch

    IPC CAM is plugged in port 2, but is showed as down
  4. V

    IPC Cam power while in NVR but not in PoE Switch

    I updated the post with the link of switch, it have a total budget of 230W, with two ports that can offer up to 90W and other 14 ports offering up to 30 W My PTZ cam uses up to 33W with IR light on (20W if off). The Facial Access uses up to 12W. I also tested use only IPC cam on switch, but it...
  5. V

    IPC Cam power while in NVR but not in PoE Switch

    I have a PoE IPC CAM, a PoE NVR, and a PoE Switch For some reason, my IPC Cam stopped powering on when plugged in Switch (used to work), but if plug it in my NVR, it power normally. I changed port, the network cable but not solved. For information, i also have a PoE PTZ Cam and a Facial...
See more
Top Bottom