Recent content by veetek22

I find it hard to believe that it has anything to do with the firmware , rtsp stream to shinobi or avlc renders smooth video ,

Quick update after going back and forth with support - BI customer service has not resolved the issue. Tried everything that he suggested and at the end of the day I was advised to check the CPU etc which I did. Tried to eliminate possibility of it being hardware related. Vlc streams are fluent...

Hey , Unfortunately my struggle continues…. I’m working with BI support and changing some settings and testing but so far no luck with resolving the issue. Mine are stuttering every second and when I export it to mp4 it improves a bit but it is still noticeable. What I did so far is - Tried...

quick update , moving to 15fps across the board did not help , so frame rate is not an issue here. tonight Ill move everything to the new box. WIll also try the substreams after that. Unless you guys have any other ideas? Thank you again for help!

Thank you for advise, I downgraded to 5.5.1.20 , so to clarify detect motion on a substream and once triggered record at 15fps ?

I have done that , so far no response.

Screenshot below , moved back to KVM host reduced fps to 15 on all cams, no HW acceleration enabled. I'll run it for a day and see what it looks like. cpu utilization hovers at around 15% spikes up to 20 when theres a trigger on 1 or 2 cams In a meanwhile I'm prepping dedicated 11th gen i7...

That I dont know how it works, however I just realized that you can select any version from 2021 and downgrade. Ill give it a shot.

Tried few different drives already , SSD , NVME, SATA etc, under ESXI, KVM, and baremetal :( same issue.

Hi so my experience is very similar , VLC and ONVIF MNGR stream is as fluent as it can get at 30fps. HDD i checked under KVM with directly passthru NVME same issue , baremetal win10 with standard sata drive same issue , ssd same issue , nvme same issue. Something happened after one of the BI...

I'll get that screenshot tonight , I havn't had any problems for a year or two running under ESXI , with UHD630 passedthru. Anyway , as I stated in the original post - ran on baremetal too under win10 with same issues. Thank you for you input.

It is connected to a small Ubiquiti POE switch which is uplinked to a 24 port UBNT switch. BI server is on the 24 port switch. no VLANS or anything.

tried substreams +mainstream , no change mainstream is recording choppy vid. :( I'm beginning to think it might be a cable issue - highly unlikely but I'll take the camera down and hookit up on a different cable to see if that changes anything.

Thank you for your help , Brought the FPS down to 20fps , change do CBR and increased the buffer to 30mb, issue still persists. Will try to lower it down to 15 tonight and run it for 24hrs. Thank you,

Hi, I'm having problems recording videos that are not laggy/choppy - it looks like it's skipping/delaying frames (see below for sample videos) As far as the hardware goes: I run it on Intel(R) Xeon(R) E-2224G CPU @ 3.50GHz which used to have no problems handling 6 cameras with quicksync on...