Recent content by vasycara

Так покажи прошивку раз все работает

Please put here the firmware that the Chinese sent for you.

https://download.xm030.cn/d/MDAwMDEzMjc= This is the latest firmware for 00030747 from xm, but with this firmware the camera no longer has pan tilt and zoom

I have this IP camera. Zoom and pan tilt work with this firmware.

Does anyone have firmware for this ip camera ?

I have this camera ip with this firmware,and i have onvif.

https://download.xm030.cn/d/MDAwMDExNDI=

Tray this firmware.is original firmware

00030695 ? This is your camera ?

The ip camera restarts many times and does not always return to the initial position, I cannot download the files from the sd card. Annke refuses to send me the firmware.

It is a ptz ip camera with 20 optic zoom. WZ500 - 5MP PTZ WiFi Security Camera, 20X Optical Zoom, Two-Way Audio, 328 ft Infrared Night Vision, AI Human Detection & Auto Tracking, Support RTSP & ONVIF- from annke, but they don't have firmware for it on their website download. Does anyone have...

@vasycara - Did you / do you use LastPass? If so - best change any passwords that were stored within the vault. OK. I changed my account password.

With this command ip camera responds to ping, and appears in my network. I can upload files with tftp but I don't know what to upload, I have a good firmware that ip camera has worked with before.

Seems to have net addresses : U-Boot 2010.06 (May 23 2014 - 08:55:45) NAND: Special Nand id table Version 1.35 Nand ID: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 No NAND device found!!! 0 MiB Check spi flash controller v350... Found Spi(cs1) ID: 0xC2 0x20 0x18 0xC2 0x20 0x18 Spi(cs1)...

I have a Wanscam ip camera, after loading with bad firmware the ip camera is dead It does not appear in my network, it does not respond to ping If I use a serial console interface with Putty I see this U-Boot 2010.06 (May 23 2014 - 08:55:45) NAND: Special Nand id table Version 1.35 Nand ID...