Recent content by Tro

I have been running a few machines in the past, currently running an I7 9700k - with 10 cameras - combination of 8/5/2mp I have an old server running (had for some time) Dell 710 and will be moving BI across to that for a week If your interested, I can let you know how that goes p.s. power is no...

This Yoosee Doorbell isn't very good quality, 2 main issues 1: Had a few people at my door and the call never came through, app was running in the back ground (IOS) 2: Quality of the lens - isn't focused on left side (not centred?) - degrades from right to left (right side and middle clear as...

Yep I am aware :) What i didn't know was the option to have different profiles set up on the 1 Geo-Fence? (If i am correct) So on each camera I can set up 1 Geo-Fence to be active during daytime profile and 1 active during night profile? Tro

I have the schedules to change from night to day - to work in relation to dusk/dawn what I would like... Camera settings for these scenarios: Daytime when i am home Daytime when I am not home Night when i am home Night when i am not home + after 10pm - until daytime kicks in My current set-up...

Just a quick update on file moving error Reset all passwords and re-set up run as service several reboots and still no go, after going through every setting in passwords and security etc that I could find, the system booted into Blueiris user (which was never an option) Went to share folder and...

Strange, When i recently set up my doorbell I had issues that were similar -delay (freezes) but catches up Had to play with the settings a little on the main add camera config page Assuming set up the same as other 2 X 8mp cameras... check to see if all the tick boxes and (main) feed string...

A few things I would try - I have a similar set up (9 cameras - i7 9700k) Save the cam config and set up as a new cam - with minimal change - set fps same as other 2 X 8PM cams Swap location with another camera I did my own wiring and did find 1 cable that had 1 pair down recently - although...

I got this last week, only took a week to arrive also (I am in Australia) Took me 30min to see the active button bottom left... while setting up and testing It did change its IP after 1 night on BI, so allocated an IP in my router 2mp - but very wide angle, so not a great picture Set-up with BI...

Interesting, I am certainly no expert, but I have my gear behind a firewall etc never had an issue, both PC's are dedicated to BI and don't get used for anything else If they are on the same network, similar exposure? cloning is simply another copy - helpful only if you want to save 2 copies or...

This is something i struggled with for some time I even created different profiles for mornings and evenings to avoid shadows from my trees - which i didn't keep (I do have a windy profile however) you could try different angles with your zone lines/areas - but as the sun goes down - those...

How have you got your zones and hot-spot set up? I don't think the sensitivity settings come into play with zones and hot spots (I could be wrong) (hot spot records on alarm no matter your settings) Maybe have a play with object detention if car lights don't hit your lawn all night long Or set...

Hi there, Do you need to clone the cameras? what are they doing differently that you want 2 versions? Have you mapped the network drive your trying to use? (are the BI and server machines on the same network? - home/work group) There are about 10 folder options (clips and archiving), how...

Hi all, hope your all surviving COVID-19! I have hardly made any changes over the years, but recently have noticed a few issues BI 5 - latest version - WIN10 Wondering how others have schedules and profiles set up I have 2 schedules - night and day I have 4 profiles - night, day, home and...

Took a gamble on some older avm542fp 2mp cameras - got 4 for almost nothing Quick research before i picked them up, suggested they offer Onvif and rstp etc Although unsure what the FP stands for The P might be POE - whats the F? anyone have an idea? They all fire up, (can heare them turn on...

When I first set up my 8mp cameras I had the same issue (mainly when viewing through chrome) I lowered the frame rate and set the compression back to H264 (and set the rate) - i believe it was the H265 that caused my issue Tro