Recent content by tradertim

I think you guys should use iVMS for android/ apple. You get the extra features like remote controller where you can disable remote from app the smart/motion detection. Remote playback etc from device. I had/have tinycam but havent used it for ages. Implement OpenVPN client from your phone...

The certificate is generated in a unique form and then encrypted with your unique user and password. Unless a device has that certificate loaded on it locally, AND knows your vpn (encrypted) user & password they can't gain access. I think you are good. I've never had problems after...

What hackers do is they run port scans on your WAN/ modem address that shows what ports are open with port forwarding. Happens on the whole internet trillions of times a day on every public IP address. The way VPN works is the router generates a unique digital certificate, and vpn usually...

One thing that sort of worked in the past enlargening holes with cables i'll share...... attach a thin wire to the rj45 strippped wires, loop the wire twist rj45 wires around. tape the joints with electrical tape each end then the middle -push the cable rj45 up into the soffet left with...

thanks for useful post - yeah camera over the soffet hole for sure, i'm not much of a fan of exposed cable runs. thank you.

thank you this was a useful post. yeah I suspected I needed a 25mm hole. the reason I dont have the cams is its a new home and its down the order of priorities but need to run cables to close in soffets.

yeah but ive posted this under the hikvision camera section and so I was more concerned with the hikvision rj45 waterproof connector.

Hey mate read the post again as you've clearly got the wrong end of the stick as to what i'm asking. CAPS even - interesting. I was asking for people who had used the waterproof rj45 connector what hole size they recommended. Hopefully i'll get some mre useful responses. cheers

Hi everyone. Currently preparing for camera install but dont have the cams yet. Please does a 20mm soffet hole work for the waterproof rj45 connector or do I need 25mm? I have drilled all 20mm holes but i see the rj45 Hikvision connector might be 19mm. e.g. a bit tight. What are your methods...

Hi does any one else have this problem? Every now and again I lose the draw fields for Line Crossing and Intruder Detection and the cam no longer sends alarms for those settings. The camera is a DS-2CD2432F running 5.4.5 Build 170123. The reason I stopped there was the restrictions I recall...

There is a youtube video on the DS-2CD2365G1. By all accounts the 6mp seems really good, local installer here talks well of them & they have "dark fighter". But really if you want good night time vision you gotta install a IR Illuminator.

yip will do. might be a few months as its for a house build. in the meantime if there are any learnings please share

Hey thanks alot Appreciate you taking the time to clearly display out the variances and impacts in such a clear to see manner. It might be a case of deploying IR Illuminator as well There arent many comments in forums on DS-2CD2365G1-I so bit hard to get a gauge. Have read a couple of...

hi mate. how are these performing in night & daylight. i am thinking of deploying these. DS-2CD2365G1 rgs

per below please what do you think of DS-2CD2365G1-I "dark fighter". I will also likely deploy IR illuminator. rgs