Recent content by Stingraymax

  1. S

    Is my NVR done ?

    Thanks for all the help, I will be ordering the ups. I just want to hook the NVR to it so it will take any spikes in power so I may get more than 4 years out this new nvr :confused:
  2. S

    Is my NVR done ?

    Ok, so pulled out all the poe cables and hdd cables but still the NVR refuses to boot up, it is an internal power supply, I see a red light blinking on the motherboard and the fan of the power supply but that's it. So for the next NVR I was looking to put a UPS in front of it, would the Eaton...
  3. S

    Is my NVR done ?

    Would this be a good enough UPS ? Eaton Ellipse ECO 800
  4. S

    Is my NVR done ?

    Ok, I will try without the poe cables and see what happens...
  5. S

    Is my NVR done ?

    Yeah that is what I figured but 4 years :oops:
  6. S

    Is my NVR done ?

    Thanks for the info, I have a brick type op power supply. I removed the HDD and still nothing, the internal fan turns and a red light inside on the motherboard but nothing more happens.... I will test the voltage with a multimeter and see what comes out of that, I ordered a new one from Andy...
  7. S

    Is my NVR done ?

    I tried everything, she's dead after 4 years...
  8. S

    Is my NVR done ?

    I tried it thru the dahua software for desktop, I can see the ip adres for the nvr but it says offline....
  9. S

    Is my NVR done ?

    Ik krijg geen beeld, enkel zwart scherm dus kan niks instellen....zelfs met heropstarten krijg ik niks van beeld
  10. S

    Is my NVR done ?

    Hello, Yes I'm connected straight to the NVR via hdmi and mouse, and nothing comes on the screen. I checked the cable and monitor and that is not the problem.
  11. S

    Is my NVR done ?

    Thanks, I also think it is the mono that is fried :banghead:
  12. S

    Is my NVR done ?

    Hello, I have a Dahua NVR NVR5208-8P-4KS2E NVR and has been working flawless until a week ago, black screen and not reachable via internet. Before I could check the camera's thru the DMSS app and worked without hiccup until now.. Nothing happened to the nor, nobody touched it or did...
  13. S

    Weird problem with new NVR, can somebody tell me what I'm doing wrong ?

    I have a setup with a Dahua NVR 5208-8p an 4 camera's IPC-HFW4300S a SD22404T-GN and a IPC-HFW4431R-Z. I replaced the nvr with a 5208-8P-4KS2E from Andy, now when I connected the camera's only the SD22404 and the HFW4431 came on immediately, the other 4 camera's I had to change the setting to...
See more
Top Bottom