Recent content by Solider
-
S
R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.
I have 2 same model cameras, both with the same issues. I only need 1 to be working. I tried the same steps for both, using 2 separate folders to not mix up the _mod files created and edited. Both cameras had slightly different checksum-16 values. I was trying to get one back up and working... -
S
R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.
I just got the 5.4.5 to finish successfully from PuTTY and the fix tool v2. Before I ran PuTTY to install the firmware the SADP tool was able to see the camera as mini-system, that is the fixv2 renamed digicap installed. But after I finish the steps to install the camera's 5.4.5 firmware... -
S
R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.
the first time I ran it, it had a 01 in location 0x10 I believe it was already an English camera. I did try the code 05 98 and recalculate the checksum to get the same outcome. Is there any way to bring the camera back to life? -
S
R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.
It had 5.3.0 when I used the brickfix2 -
S
R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.
I attached the edited mtd6ro_mod file. the camera is a DS-2CD2032F-I. When I try step three in PuTTY to install 5.4.5 the process errors. I tried every older versions of the firmware, "5.3.3", "5.3.0", "5.2.3" and they completed successfully, but the camera would not populate in SADP. I... -
S
R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.
I have followed you fix tool to the letter. I have successfully unbricked an NVR and was able to get all are Hikvision cameras back up on 2 NVR's in 2 buildings thanks to your instructions . However, I have one camera I can't get to work. It is an DS-2CD2032F-I. I was able to get to the end...