Recent content by slowhand23

I have one doing the same thing, been playing with different settings over the last few months with no success.

Hello, I also have a older NVR5208-8P from 2016 and considering updating firmware but recently NVR has been losing password & system info on reboots. I’m thinking maybe the internal system coin battery needs replaced but not sure. Have you replaced your battery? Thanks!

Hey guys, 5.5 yr old NVR running fine until recently username/password resets and camera channels got changed around. Both occurrences happened during NVR resets, first one was weekly maintenance and second was user initiated. Thinking maybe battery low and not keeping system info? This was my...

Hello, I’ve been reading through this thread but haven’t seen anything mentioned about configuring SD card as back up storage. I’m using a new 5216-16p with 6 TB Purple HD from Andy and the interface looks a lot different than my older 5208-8p. I haven’t seen anything related to the SD cards in...

Following

Ok, thanks for the response!

Hey Guys, I just picked up this cam from Andy's Amazon store and having trouble viewing both channels on a NVR5208-8P. I can see both channels listed in my Camera/Remote top box however, it shows channel 1 in port 3 but 2 is 37777. All 8 channels are used, do I need to have a open channel...

Are these similar to the Annke l61 cube? Work with Annke app? Thanks!

I've also had good luck with this crimper tool and connectors!

@EMPIRETECANDY Thanks for the response Andy! I already checked for loose cables when I had camera apart to access reset button but all ok. I think the camera has a problem, please contact me to arrange a replacement.

Thanks for the reply @Terk & @nymphaeles ! Unfortunately, the camera went offline again before we could try the suggestion. Replaced with a another new Starlight 3.6 from @EMPIRETECANDY and problem went away. Reset the problem cam and tried with a different NVR (5208-8P) but same results, device...

Hello All, need a little help with a new install I'm supporting. Ran into a problem with this camera and a 5216-16P NVR. Camera worked initially, then was unplugged to move the location by about 10 feet using the same wire. When hooked everything back up, NVR didn't see the camera at all. *...

Hello All, need a little help with a new install I'm supporting. Ran into a problem with this camera and a 5216-16P NVR. Camera worked initially, then was unplugged to move the location by about 10 feet using the same wire. When we hooked everything back up, NVR didn't see the camera at all. *...

No problem, thanks for the update!

I'm interested if still available. Let me know, thanks.