Recent content by Skispcs

  1. S

    Which nVidia GPUs are you using?

    Agreed. One of the reasons I like using the 3050 6GB card. No external power connector. Only uses the PCIX slot power. Most of the time it is only drawing 15 watts and it maxes out at 70 watts. Avg YOLO5 inference time is 35ms for 16 HD cameras I don't need the fastest GPU, I need power...
  2. S

    Gunshot Detection?

    You are not going to be able to determine the difference in the sound of a distant fireworks/gunfire using the quality of microphones built into cameras. Even fancy microphones are not going to really help with that problem. What is more feasible with good equipment is to detect the supersonic...
  3. S

    Which nVidia GPUs are you using?

    I am not sure how you configured yours but both of my BI systems running YOLO 5 on CUDA hovered around 10% utilization 99% of the time. Measured using task manager and GPU-z. Again, it all depends on what your priorities are. 1650 handled BI and CPAI running 16 cameras without breaking a sweat.
  4. S

    Which nVidia GPUs are you using?

    I was confusing you with the OP for a minute. You state your biggest problem is the accuracy. I am not confident that I can provide a good solution for that so I wont address that part. You have 6 cameras, that is not a heavy workload and most likely you could handle that without a dedicated...
  5. S

    Which nVidia GPUs are you using?

    Optimized decisions will depend on what is most important to your use case. My primary use case is CPAI connected to BI machine running 16 HD cameras. The optimum choice is whatever can handle that workload for the least amount of electricity cost, the cheapest card, and does not add a bunch of...
  6. S

    Which nVidia GPUs are you using?

    I am running 3050 6gb models. They only need power from the PCIe slot and no external connector. Max power is 70 watts, normal power usage is about 20 watts. I was running EVGA GeForce GTX 1650 XC and they worked just fine with CPAI and BI with 16 HD cameras. I would let one of the EVGA...
  7. S

    Gunshot Detection?

    My neighbors must have a source of good fireworks because they are setting them off quite frequently throughout the year. I would assume I would get a lot of false positives if I attempted any kind of gunshot detection. Most people cannot tell the difference between fireworks and gunshots even...
  8. S

    Blue Iris and CodeProject.AI ALPR

    TCP 0.0.0.0:32168 0.0.0.0:0 LISTENING This line means that some program is listening on port 32168 on all network interfaces. The lines that say ESTABLISHED means that something established a connection to your machine. Since the lines start with 127.0.0.1 (localhost) and the other end is...
  9. S

    Blue Iris and CodeProject.AI ALPR

    Open a command prompt and enter the command netstat -na | find "32168" You should see something like TCP 0.0.0.0:32168 0.0.0.0:0 LISTENING Copy and paste the results into a reply Also turn off your firewall or make sure you are allowing incoming TCP on port 32168
  10. S

    what GPU do i need for CodeProject.AI with my HP EliteDesk 800 G3 SFF?

    For what it is worth, the 3050 6GB will be a great choice for Code project AI and Blue Iris. My personal requirement is 16 HD cameras running as efficiently as possible. Low power usage to keep the power bill reasonable and help the UPS last longer. The 3050 6GB in my system with 16 cameras...
  11. S

    Suggested new GPU for a new build for a friend? Similar to gtx970

    The best will depend on what is important to you. I value; low power usage good price decent AI performance. I bought GTX 1650 for all of my Blue Iris machines. They only use 70 watts They do all of the coding/decoding for 16 cameras, handle Codeproject AI, and do some other AI/pytorch stuff I...
  12. S

    Starlink - anyone have it?

    I had Starlink from when it first available until this year when Gigabit fiber was installed. I went from Hughesnet(horrible) to Starlink and then just this year we had Gigabit Fiber installed on the power poles. I live in a rural area with no other options and there is no cell signal at my...
  13. S

    Web UI Not responding

    This issue has happened on two of my Blue Iris instances. Since upgrading to 5.9.8.x in order to try the AI detection, my webserver UIs have stopped working are returning an empty HTML page which displays as a white page in both Firefox and Edge. Upgraded both to 5.9.9.0 in the hopes that it was...
  14. S

    Blue Iris Teamviewer Lockup

    Running Blue Iris 5.9.6.4 Running fine locally. When I use teamviewer to access the system remotely the computer will lockup after about 5 minutes. Usually it just locks up and is unresponsive until a physical reboot and sometimes it blue screens. The minidump of the blue screen points to...
  15. S

    Upgrading parts in Blue Iris PC

    Experiment with AI with what you have first. If you really like it, I would suggest getting a GTX 1650 or 1660 GPU and run that AI on that. The 1650 and 1660 are best tradeoff on power usage versus CUDA ability in my opinion. Using substreams and direct to disc are two settings you want to use...
See more
Top Bottom