Hello
Error 2022 means the NVR was rebooted after exporting the XML file. Connect the NVR directly to the network card of your laptop or PC, then set a static IP on the network card. Reboot NVR Then turn off the antivirus and firewall on the PC. Export the file and send it to tech support...
Easy. In the place where the camera is installed, specify trusted addresses in the router settings. As a result, the ports will not be accessible when scanning on the Internet, but you will be able to access the camera from a trusted IP
Hello
Step1.
Go to the following IP address in your browser
http://camera_ip/System/configurationFile?auth=YWRtaW46MTEK
Where, camera_ip - IP address of the camera. You can find out IP using the SADP program
If you are lucky, then the configurationFile is downloaded, it has no extension
If you...
This firmware version must have a vulnerability. Try this manual
Step1.
Go to the following IP address in your browser
http://camera_ip/System/configurationFile?auth=YWRtaW46MTEK
Where, camera_ip - IP address of the camera. You can find out IP using the SADP program
If you are lucky, then the...
Hello
You did not start communication with this company correctly.
Go into the SADP program, export the XML file, save it on your computer.
Then you write the letter of the following tipun Annke support mail:
"Hi
I use your IP camera and forgot the password for it. Please help me reset my...
Hello
In older versions of the firmware, you could use any browser to go to the camera settings, in the new Hikvision introduced restrictions, and now you need to use Internet Explorer. Alternatively, you can use the Batch Configuration Tool to quickly configure the camera.