Recent content by S_K

  1. S

    2 separate networks with one internet connection

    Could it be the VLAN of the PoE switch that prevents communication b/w the subnets? Maybe I need to cancel the VLAN or set static route on the switch?
  2. S

    2 separate networks with one internet connection

    Yes, it's the gateway for both networks. But for the cam network only the NVR needs internet access (the gateway on NVR is set to 192.168.2.1) The hp poe switch is layer3
  3. S

    2 separate networks with one internet connection

    the options for interface are: pppoe_ptm_0_0_d LAN I tried LAN but then also the pppoe
  4. S

    2 separate networks with one internet connection

    I get this message: Error code: 5108 "Gateway must be in the same subnet with interface IP address. Please input another one"
  5. S

    2 separate networks with one internet connection

    static route is empty and the firewall is in it's default factory configuration (not enabled)
  6. S

    2 separate networks with one internet connection

    I don't get ping response from the NVR. But shouldn't it be like that once these are 2 different subnets and VLANs? I can only get response from the router when I ping both of the subnet gateways. Edit: On the router: The office interface address is 192.168.1.1 The cams interface is 192.168.2.1...
  7. S

    2 separate networks with one internet connection

    I haven't tried that yet and not sure how to do it, but anyway I need to install the iVMS 4200 on one of the office computers for remote viewing. What should I configure in order to access the NVR on the cam network from a PC on the office network? (different subnet and VLAN interface)
  8. S

    2 separate networks with one internet connection

    I've set up a VLAN interface for the cam network on the tp link router (Network>Interface Grouping settings). So now the office network is the default group connected to port1 of the router (gateway 192.168.1.1) , and the cam network is connected to port2 (gateway 192.168.2.1) via the hp...
  9. S

    2 separate networks with one internet connection

    Thanks, I'll try it.
  10. S

    2 separate networks with one internet connection

    Currently lan1 works independently with the HP switch that can function as a router. If I understand correctly, I can set the tp-link router to handle both of the subnets as you have suggested. But if I do this and the tp-link router is down, lan1 will be down too with nvr not receiving the...
  11. S

    2 separate networks with one internet connection

    Hi, I’ve recently installed a surveillance system in an office and it works at the moment as a separate private network that relies on an HP layer3 smart switch (lan1). In order to add remote viewing I need to connect the camera network to an existing small network (lan2) that already includes...
  12. S

    Port forwarding \ open ports bad, VPN Good...What about DDNS?

    DDNS is just an alternative or substitute to static address from your ISP. You only need either one, not both - for any VPN or port forwarding configuration.
  13. S

    Port forwarding \ open ports bad, VPN Good...What about DDNS?

    The OP also mentions P2P connection (I know that Hikvision offers remote viewing via P2P cloud which is simple to set up). Is this method safer than port forwarding since it doesn't require leaving exposed ports?
  14. S

    DS-2CD3345-I strange interference when WDR turned ON: 4 horizontal lines appear

    Not sure what I'll do. I might just use these 2 cams outdoors, or indoors with WDR turned off. I got it from eBay and maybe I'll try to ask the seller about it. Maybe I can install a different version of English firmware if the seller provides me with one? Interesting idea. How do I load the...
  15. S

    DS-2CD3345-I strange interference when WDR turned ON: 4 horizontal lines appear

    I updated the first post and title. Reading your post and also the "White flashes on HikVision 4MP cameras" post, I think that the non official hacked firmware is usually buggy. I believe it may also be the cause of the fluorescent interference problem I'm experiencing. I find it hard to...
See more
Top Bottom