Recent content by Roxana31

Code

I performed a firmware update today on my DS-2CD2047G2-L camera, directly from the Hikvision website, to version Firmware_V5.7.15_240411. I noticed that in areas where motion is detected, even with leaves, strange codes appear on the image, both in real time and on recordings. I have never seen...

I also tested the memory card and it's not from the card, I also have other surveillance cameras and the card works perfectly in another camera, I tested two more sandisk cards and it does the same with these, the problem is from the camera, is there something

I set the recording mode Off, at the resolution I set it again to 5MP h.264 resolution 2560x1920 fps 15 bit rate type cbr bit rate 2048 I also take out the memory card and if the problem is from the card on live it should be image italics if the problem is with the memory card

I thought it was from firmware version DH_SD-Hertz_MultiLang_PN_V2.810.0000034.0.R.230209 I asked the people from Dahua in my country for other older firmware versions and I downgraded but with all versions it jerks the same when it is left at 4MP or 5MP now I have the firmware version...

Only at 1920X1080P resolution, with 25fps and a bitrate of 4096 does it go better. I bought a camera with a 5MP sensor and now I have to downgrade it to 2MP and 1920x1080 resolution to work decently. It's clear that this camera model has very weak hardware, and at higher resolutions, the...

Only on 1920X1080P at 25fps with bitrate 4096 it works better but I bought a camera with a 5MP sensor and now I have to keep it on 2MP at 1920x1080 to work decently

This is how it is set now, it also jerks on h265, any settings I would make are just as bad, it works with jerks and interruptions both live and the recordings on the memory card

It records on the memory card and on the server, on the hard disk, in the same way it records jerkily

Hello! Is your camera jerky with live interruptions and recordings? I also bought one and it works jerky with interruptions, I don't know if this model works like that or if it's my fault, look how it looks

Hello! I don't know if it matters what kind of files you have on the hard drive, I formatted ext3 and it has been working perfectly for several months

after downgrade it works again with my asus router RT-N18U

I downgraded to the version with which the camera came from the factory with hikvision batch configuration tool works again and smb

I noticed on several ip camera models from hikvision after the smb firmware update on the asus router the camera no longer works the camera no longer sees the hard drive can no longer connect to it does anyone know what's going on they changed the smb version on hikvision cameras it no longer...

Hello! my camera hikvision model ds-2cd2047g1 it came with factory firmware 5.5.84_19082 I have an asus RT-N18U smb router it works perfectly with a 160Gb ext3 hard drive in the usb socket to share with this camera model the problem is after the firmware update at the hikvision smb camera it...