Revo2Maxx's latest activity
-
Revo2Maxx replied to the thread White noise after trying to connect ONVIF IP Camera.Does the display work in Single channel view? Could be an issue with the type of Sub Channel they are using in the other brand camera...
-
Revo2Maxx replied to the thread White noise after trying to connect ONVIF IP Camera.Sounds like a Decoding issue or maybe the camera and NVR are not within the right codec types and or maybe your NVR was setup to Enforce...
-
Revo2Maxx replied to the thread Amcrest NVR 4108-HS.In this I removed 9-16, I don't have any cameras on 14-16 because I am at max incoming with the connected cameras of 185Mbps of 188. So...
-
-
Revo2Maxx replied to the thread Hikvision Cameras Wont Show on NVR in Live View.Yes easiest way would be to Reset the cameras back to factory.. However if the NVR and cameras are talking there are some NVRs that have...
-
Revo2Maxx replied to the thread Amcrest NVR 4108-HS.That is for the A2 but is the same Bandwidth.. I don't think that is the issue as I have taking mine over and it wasn't locked just said...
-
-
Revo2Maxx replied to the thread Hikvision Cameras Wont Show on NVR in Live View.Sure you have the right IP addresses setup in your NVR? The IP address belongs to the U of T. I thought that was in Canada? If that...
-
Revo2Maxx replied to the thread Amcrest NVR 4108-HS.So here is one of my 4108E-HS and should look like your 4108-hS GUI.. removed the connected cameras that were on the POE to show the...
-
-
Revo2Maxx replied to the thread Amcrest NVR 4108-HS.Under the user group.. What FW are you using? Because on the current version only way I can get it to do it is if I setup a new account...
-
-
Revo2Maxx replied to the thread Amcrest NVR 4108-HS.Right out of the gate what comes to memory and seeing I mess with so many devices I could be wrong. So here is what to look at. In your...
-
Revo2Maxx replied to the thread Amcrest NVR 4108-HS.Sounds like you have your system setup to log out, Then setup for the cameras that are going offline after the timeout time are setup...
-
Revo2Maxx replied to the thread Pay Attention To Your Surroundings -- January 14, 2025.Don't have White Tipped here, But in the last 3 years I have lost a Female dove every year. First year was to a Cat at the back bird...
-
Revo2Maxx replied to the thread Dahua NVR Web Interface.Well the ones that are in the post was Connected to my POE+ Switch connected on my normal lan. Also if I access my router and turn off...
-
Revo2Maxx replied to the thread Dahua NVR Web Interface.I am not sure how everyone has DMSS setup buy in my case. Setting up P2P and with p2p on in camera my alerts are active. I turn off P2P...
-
-
So the chip I got wasn't the correct one. Ordered chip off different 4mp poe that I repaired few different ones in past had same chip...
-
-
Revo2Maxx replied to the thread Hikvision motion detection.Well to be honest you don't want to turn off the Motion detection of your cameras.. I mean if you have cameras setup in Bedrooms or...
-
Revo2Maxx replied to the thread Hikvision motion detection.Well you are asking about stand alone cameras where then you say an Alarm system you can turn off all sensors. Well the same could be...
-
Whether it is dual or 4 lens, the same concept applies when stitching together multiple lens into a panoramic - any light differences...
-
Revo2Maxx replied to the thread Help problem with image.What one of the 4 sensors do you think is weak? Could be IR return to the sensor. I just looked at your B/W picture and can see in all 4...
-
Revo2Maxx replied to the thread Help problem with image.I have an older 4 lens camera like your 4 lens 32mp camera. Where mine is said to be 8mp Amcrest IP8M-MD180E-AI that is just the 4 2mp...
-
Revo2Maxx replied to the thread Harddisk is not detected in dahua nvr.ESD is a real thing.. Personally wouldn't do any work with a HDD on a carpet. People man handle HDDs at times touching the PCB that is...
