Does anyone know how to reset the password on the value indoor station without major surgery? I purchased one used. Seller says he didn't set a password and HikVision will not help. I have gone through every menu multiple times, updated (using US firmware) via TFTP without any issues, and looked...
U-Boot 2010.6 Clean Build for Fullhan FH8830
It's extremely likely this will brick your device! DO NOT FLASH THIS UNLESS YOU HAVE A FULL FLASH BACKUP AND ARE WILLING AND PREPARED TO DISASSEMBLE YOUR DOORBELL AND RESTORE THE FLASH FROM AN EXTERNAL PROGRAMMER. YOU MAY NEED TO DESOLDER THE IC TO...
Some updates for you.
RT-Thread removed the FH8620 BSP because the GPLv2 license of the BSP provided by Fullhan conflicts with the license that is used by the RT-Thread project (Apache). The RT-Thread FH8620 BSP is still available by downloading the old release of RT-Thread or browsing Github...
The software on this is terrible. Has anyone been able to boot Linux? I found several other cameras and camera boards running Linux with FH8830 but all of them are no longer available. Even checked for used items on eBay but no luck. Using FH8833v100 kernel from OpenIPC I don't get very far...
Thanks for the link. This community needs something like the custom router firmware community has (search wikidev... or is it wikidevi? deviwiki?), which lists the actual hardware that's used in routers.
I've seen a lot of these bare camera boards. Are they typically sold with access to the SDK...
I realize this is quite an old thread, but I ran across it in a search. For anyone else that's looking, it appears that Hisilicon is still widely used in HikVision cameras.
On an unrelated note, I have a DS-HD1 with a Fullhan FH8830 running RT-Thread and have been doing some research in an...
It seems HikVision DS-HD1 is built on this same platform. I have a flash dump and serial console. Surprisingly, many u-boot commands are intact.
Same flash: GD25Q64C
Has drivers for DM9051 SPI Ethernet and I suspect some test points on the board are for connecting this NIC for debugging...