Promod117's latest activity
-
Promod117 replied to the thread Signal Drop.I'm really beginning to question the cable. Although it is Cat6, my other 4 cams on the same switch are on some 10+ year old Cat5... -
Promod117 replied to the thread Signal Drop.Netgear PoE+ 8 port Gigabit. I wouldn't rule out the switch. It gets awful warm in the attic. I've gone through more than a few. I...
-
Promod117 replied to the thread Signal Drop.Finally had the opportunity to test this. Made no difference. THe camera still dropped momentarily. I've changed the setting to record...
-
Promod117 replied to the thread Signal Drop.Checking all my other cameras and my other system it seems as if this is a default setting and I have never gotten an error from it...
-
Promod117 replied to the thread Signal Drop.Didn't get a chance to try this yet. Hopefully one night this week the garage will be empty and I can get up in the attic to test....
-
Promod117 replied to the thread Signal Drop.I'm not sure if you're suggesting this be checked or unchecked but it is checked, by defaut, in all of my cameras.
-
Since it only seems to happen in BI, check the Watchdog settings.
-
Promod117 replied to the thread Signal Drop.You raise a couple of interesting points. I too thought of the address conflict. Advanced Port Scanner did not show anything but I...
-
What are the camera settings for: Encode mode Resolution Frame rate (FPS) Bit rate type Bit rate
-
The TV buffers, whereas these cameras do not, that is why the TV doesn't lose connection. Are your cameras going thru the router to get...
-
WOW - then the next thing to consider is the quality of the switch. Cheap no-name can be problematic. Or maybe you are approaching the...
-
Well unless you have all PTZs, that should be enough to power your 4 cameras connected to it. I hate to say it, but with something like...
-
Been there...done that! :cool:
-
I would try to keep this simple and power only this specific camera with a POE injector. If the camera operates fine then it’s the...
-
Promod117 replied to the thread Signal Drop.The hacking part occurred to me the first time.. Changed the password and forgot to write it down!
-
Promod117 replied to the thread Signal Drop.That group of cameras run into a Netgear GS108PP which feeds into a Trendnet TEG-S16D which feeds my rack's Netgear GS324TP. The...
-
Promod117 replied to the thread Signal Drop.Encode mode - H.265 Resolution - 1920 x 1080 Frame rate (FPS) - 20 Bit rate type - CBR Bit rate - 1536 Kb/S Other than the...
-
Promod117 replied to the thread Signal Drop.Yes, router removed, cameras still connected to BI.....
-
Promod117 replied to the thread Signal Drop.Currently, the 5 cameras and TV are connected to a switch in the garage attic. From there is a single lead feeding to the main switch...
-
Sometimes is just affects the last one added. But since it has happened to two different cameras on the same line AND you said the TV...
