Recent content by okestone

That's correct. ...thus leaving 2 pins for the red and black power supply. Any way, it works great.;)

Sure! Standard RJ45 pin-out, except red goes to pin#5 (blue stripe) and black to pin #7 (brown stripe).

RESOLVED: Well it didn't seem like a replacement cable was going to be an option so I set out to repair it. Since I am using the camera with POE, I cut the cable just above the external power jack which left me with 6 wires with standard rj45 colors except without blue striped and brown striped...

I'm sorry, I should have been more clear about what's going on.:) This camera was installed and working for a couple of years until moisture got in the RJ45 part of the pigtail connector and corroded it. I have tried everything to clean it up and resurrect it, but to no avail. So I need to...

I need a Ethernet/power cable pigtail for an EmpireTech 4MP Ultra Low Light Turret IP Camera. Is there anywhere to buy one? I'm not having any luck.

Thanks to Hysh on another forum for this fix! How to enable RTSP Step 1: Ensure the camera and your phone are under the same network Step 2: Open EZVIZ app, tap the profile icon on the top left > Settings > LAN Live View > Start Scanning Step 3: Tap the camera you need to use, input the...

Thank you.

Hello. I have 5 cameras, (1 Hikvision,2 Dahua's, 2 EZVIZ's) setup on a home network with a network switch and Blue Iris. 4 cams are hardwired, 1 is Wifi. Everything was working well with Blue Iris until 3 days ago. The 2 EZVIZ cams, (1 wired, 1 Wifi), quit at the same time and I cannot for the...

Got it! Thanks again.:)

I can't find shutter settings. Can you elaborate? Thanks.