Recent content by Muzi

Thanks Mark, appreciate the assistance. I have placed the cameras into the nvr previously and checked the IP. WHilst in the NVR If I set the cameras as static 10.1.1.x range, then place them into the separate POE, I cannot see them. If I set the cameras to DHCP, and place them into the separate...

Apologies for the confusion giomania. let me attempt to clarify: Local Network: 192.168.1.x range Dahua NVR: 192.168.1.108 (Static) | SUBNET - NVR Built in POE (switch) 10.1.1.1 - Cameras within NVR POE: 10.1.1.65 -68 (DHCP) Tenda external POE (Smart Switch -TEF1210P): 192.168.1.19 Cameras...

Thanks guys, but have already managed to get the camera IP's through the built in NVR POE using the config tool by connecting the laptop directly through to the built in NVR POE. Forgot to mention in my original post that the NVR POE is on the 10.1.1.x range. THE IP's are not conflicting as far...

Hello, newbie looking for assistance. Cannot find much on the net I have a separate external POE (Tenda) smart switch. with IP 192.168.1.19. My network is on the 192.168.1.x range. My NVR with built in ports is on 192.168.1.108 range. How do I access the cameras with the Dahua config tool on...

Decided on a DIY project and got myself an entry level Dahua setup. Been struggling with a few elements and hope for some advice. NVR4116HS-8P-4KS2 – 16 channel NVR with 8 poe 4 x IPC-HFW1220SP– 2mp Bullet 2 x IPC-HFW1420S – 4 mp Bullets 2 x HFW2421RP-VFS – 4mp motorized Bullet 8 Port POE...