@bigredfish @wittaj
thanks to both of you for the advice. I have never given too much weight to the mp/sensor ratio. My perimeter sides are about 40 meters long and there are currently 2 cams on the two opposite sides that "look at" each other. based on your advice I thought of the following...
ok, thanks for the advice. to understand better so in your opinion it makes no sense to look for something that can perform a more accurate analysis but would it be better to replace the cams with a more appropriate model? if so, which one?
I have several DH-IPC-HFW3841E-S-S2 and some IPC-HFW2841T-ZAS.
Unfortunately the IVS they have on board seems not to be 100% efficient.
If what you say is true (so wizmind is the same as wizsense) what type of hw should I use to improve the reliability of the ai? For example dahua IVDs?
hi, thanks for the answer
It's written exactly what I have to do. I specified that with my current system (ai by camera with wizsense cameras) the ivs is not 100% reliable enough to be able to integrate it with an anti-theft system (with sirens and alarms).
The question is clear: is wizmind's...
Hello everyone.
I currently have a dahua system with 24 cam (8mp wizsense) and an nvr5232-el wizsense.
My goal is to be able to carry out a more high-performance AI analysis with IVS, so that I can integrate my cams into my anti-theft system (therefore use them as external detectors).
I can't...
Hello everyone, I have a small doubt about nvr dahua (5232el)
Using third-party cams (such as AXIS), will the information about the video analysis that the cam itself performs also be shared with the nvr? I ask because I would have the possibility of purchasing some thermal cams axis to...
I solved it and found the compatible firmware by contacting Dahua technical support who sent me the firmware for my iPCs. I don't know why they aren't mentioned on the dahua website. @steve1225
Hi everyone. I have 2 dahua cams: 1)IPC-HFW5842H-ZHE 2)IPC-HFW7842H-Z.
Both have firmware dated 2019 and I have some problems managing the IVS and video parameters with my nvr5232. I tried to download the firmware for these 2 cams from the Dahua website but upon installation it gives me the...
Hello everyone.
I have a question to ask you:
I have a NVR5232-EI with many dahua cams running "ai by camera" and 1 hikvision cam running "ai by recorder" with IVS.
My NVR also has the ability to use face recognition/detection if the IVS of the relevant cam is disabled.
Since my Hikvision cam...