Recent content by MarkusAgustus

I did make one small change tonight. The API calls above set the Day\Night Mode to color. For my setup color at night is not ideal. I set it to Auto so it is B&W most of the night but if there is sufficient light it will turn to color. Night API call for auto color mode...

All roads lead to wittaj... Using the API calls below I was able to use the PTZ method to change the day\night profile on my IPC-T54IR-ZE. Thank you! wittaj Oct 20, 2022 DRUM ROLL......... With help from above, I have figured out the APIs to change profiles for this camera!!!!! Here is the...

Well, it appears that all my IPC-B5442E-Z4E, IPC-T5442T-ZE and IPC-T5442TM cameras can now be be switched to the day or night profile using the BI sunrise\sunset schedule. I had one issue where I could not change the ONVIF admin password so I added a new admin ONVIF account and pointed BI to use...

I think I may have solved the issue I was having on my IPC-T5442T-ZE cameras. I found the post below by wittaj and so I tried changing the ONVIF password again and this time it worked. I'm running a test tonight on the one camera and if it works I will do the rest. I also have an IPC-T54IR-ZE so...

Hello... I have been trying to setup the automated Day Profile\Night Profile using the PTZ control. The instructions are clear. My first test failed because I had %$ in my password. I got a 404 error. Someone previously stated they had a @ in their password and had to remove it before it would...

Perfect, thank you!

Okay, thank you. Also, just realized you wrote UI3. Really nice work!

The phone is an HTC One M8 and it is running Android version 6.

I'm using UI3 version 241, and Blue Iris version 5.7.6.8.

Hi, I need a set screw for one of my Dahua 5442 cameras, too. Did you find one? If so, is the size M5 and what length worked? I'm also using a small bolt that I cut and tapered the end as a temporary solution.

Hello, I have two issues with UI3 that I cannot resolve. I'm using an Android phone. I have been using UI3 for a year and it has worked great, for the most part. These two issues have only recently appeared. The issues are consistent using different browsers, Edge, Firefox, Google, etc. Issue...

So I changed out both RJ45 connectors. To test the cable I ran another Ethernet cable from my switch to the camera, just through the house and out the door. I used an Ethernet Coupler to connect the cables at the camera and then I plugged the other two ends located by my switch into my Ethernet...

Yes, seems like the best approach. I'll change out the other connector, put it back up, and then monitor for a few weeks before locking it down for the long run. Hopefully it was just a flakey RJ45 connectior that I put on. Thank you.

Hi, I installed my 6th camera, T544T-ZE, about two weeks ago. I've had it for a while and finally got it up. It worked great for two weeks and then starting yesterday I began having issues. When I installed it I tested the connection and it all seemed good so I did the dielectric grease, coax...

Yup, this is good advice. I've been playing a lot with these settings. Every camera is different due to their location, even when they're very close. In general, I've noticed that by lowering these settings the image gets darker but more detail appears. Leaves me with the decision on how much...