Recent content by marigo

Action = reAction ;) "anybody got a light?" Later that day....Damn, you smell!!!

No, I don't think this will work because this camera is not an International camera but a Chinese one. The firmware you linked is for the International series.

Ok, thought you had found something to crack this camera to use it with "english" language. :)

Today I installed a HDW5442TM-ASE with the same problem as the TS. I ended up in a constant bit rate of 6144Kbps and an I-frame of 25 with a FPS of 25. (encode mode H.264H) The picture is clear now, but with VBR it's going from a high bit rate to a very low bit rate which makes the picture awful.

What exactly do you mean by setting the feature flag via serial console? Could you explain?

You can upgrade with the original Chinese firmware but everything will be in Chinese after upgrade. So, you're choice. Ps, use the correct firmware for your camera

Exactly, If is gets better, it's worth it. But if things get worse or end up in some boot loop, you have a bad day. Some of the members here often say, don't try to fix something if it ain't broken.

Hmm, already I can choose 'heatmap' in my version from smartplan. Which version do you have installed? I have version 200319. (see attached pics)

Thank you. I had seen it before that some had a better result after calibration. I can try it. :) Still strange that other models doesn't have to be calibrated. IVS is working, just have to setup the tripwire close to the camera.

Yeah, release notes are hard to find for the Dahua updates. Well, the camera is fine. The only thing is that IVS triggers, like a tripwire, is only working when the object is very close to the camera. None of my other Dahua's have this problem. So maybe, on a rainy day, I will upgrade the cam. ;)

I see there is an updated firmware available for this camera: https://www.dahuasecurity.com/products/All-Products/Network-Cameras/WizMind-Series/5-Series/Active-Deterrence/IPC-HDW5541H-AS-PV Can't find the release notes of it.... :( Does anyone have them?

I have all my Dahua's setup as Onvif in Surveillance Station on my Synology. (See attached screenshot) btw, In last update of Surveillance Station IVS events are supported now! (8.2.8-6335)

I just use the original Chinese firmware to update this camera. The DST feature is working ok. To adjust the settings I use smartPSS. Everything is in Chinese after upgrade. You could also use the translate feature (extension) of Chrome. https://www.dahuatech.com/download/2501.html

I see that there is new firmware for my IPC-HDW5541H-AS-PV https://www.dahuasecurity.com/products/All-Products/Network-Cameras/WizMind-Series/5-Series/Active-Deterrence/IPC-HDW5541H-AS-PV Still not satisfied with the IVS triggers and maybe this will help. The release notes link back to the...

Thank you for this new version of the HTTP API calls. I will check the section you mentioned. Hope to find the correct syntax. EDIT: Found it! It's in section 14.1.1 "Control White Light or Speaker" To enable the white light from a HTTP API call use the following command: curl --digest -g...