machineage's latest activity
-
Mmachineage reacted to EMPIRETECANDY's post in the thread Merry Christmas and Happy New year! with
Like.
Hey guys I wish you all have a very great holiday season, Merry Christmas and Happy New year! Thanks a lot for the great support for... -
Mmachineage replied to the thread Cams / NVR Arrived - Have I Made a Mistake :-/.It's late here - but I've managed to install one of the cams! :) There's no way I could have gotten this far without the help of...
-
Mmachineage reacted to wittaj's post in the thread Cams / NVR Arrived - Have I Made a Mistake :-/ with Like.
Awesome!!!!! Intold you that you could do it!!!!!
-
Mmachineage replied to the thread Cams / NVR Arrived - Have I Made a Mistake :-/.OK - plugged in each camera, one at a time, waited until each cam was registered & showing on Live. All three registered within a few...
-
Mmachineage reacted to John Williamson's post in the thread Cams / NVR Arrived - Have I Made a Mistake :-/ with Like.
They're fine.
-
Mmachineage replied to the thread Cams / NVR Arrived - Have I Made a Mistake :-/.The DNS settings on the NVR? These are the current settings:
-
-
Mmachineage reacted to alastairstevenson's post in the thread Cams / NVR Arrived - Have I Made a Mistake :-/ with Like.
Not on the hub web GUI, unless they've added that capability on the Hub 5 after user feedback. It's possible on a rather cryptic URL...
-
Mmachineage reacted to John Williamson's post in the thread Cams / NVR Arrived - Have I Made a Mistake :-/ with Like.
Network wise, no so long as you've set the IP, Gateway and DNS
-
Mmachineage replied to the thread Cams / NVR Arrived - Have I Made a Mistake :-/.OK - changed it to a static IP, clicked on 'Test', which was green-lighted, applied & browsed to the new IP with success. The gateway is...
-
Mmachineage reacted to John Williamson's post in the thread Cams / NVR Arrived - Have I Made a Mistake :-/ with Like.
You can change the default range on the VM Hubs but it's best to leave it. What you might want to do now is to change the IP address of...
-
Mmachineage replied to the thread Cams / NVR Arrived - Have I Made a Mistake :-/.Nothing - then everything all at once!! A few notes: Turns out it's not possible to change my modem / router's default range from...
-
Mmachineage reacted to John Williamson's post in the thread Cams / NVR Arrived - Have I Made a Mistake :-/ with Like.
As others have said this is simply caused by the NVR IP address being on a different subnet: Just alter the IP address of the MacBook...
-
Mmachineage reacted to bigredfish's post in the thread Cams / NVR Arrived - Have I Made a Mistake :-/ with Like.
https://simplisafe.co.uk/
-
Mmachineage reacted to wittaj's post in the thread Cams / NVR Arrived - Have I Made a Mistake :-/ with Like.
The "NVR" flash screen is a low res output that would show up on a 480 resolution TV. Once the NVR boots up and starts running, it has...
-
Mmachineage replied to the thread Cams / NVR Arrived - Have I Made a Mistake :-/.Yes, when attempting to change the 0 to 1 it's rejected. There's no app for the router that I'm aware of, but I'll check. The TV...
-
Mmachineage reacted to bigredfish's post in the thread Cams / NVR Arrived - Have I Made a Mistake :-/ with Like.
And your cable modem must be using .1 thus the conflict Perhaps a Mac person can talk you through how to temporarily set your Mac to...
-
Mmachineage reacted to wittaj's post in the thread Cams / NVR Arrived - Have I Made a Mistake :-/ with Like.
Does your router have an app that maybe you can change it there. And to be clear, you tried to change the 0 to a 1 in the IP address...
-
Mmachineage reacted to wittaj's post in the thread Cams / NVR Arrived - Have I Made a Mistake :-/ with Like.
The issue with your TV is the NVR is probably a resolution than your TV. Once you get into the NVR via the web browser, you can...
-
Mmachineage replied to the thread Cams / NVR Arrived - Have I Made a Mistake :-/.Well, this is pretty hopeless then, I'm certainly out of ideas :rolleyes:
