luk8899's latest activity
-
Lluk8899 replied to the thread Weird glare visible at night..And the mystery is solved!!! I replaced the red plastic diffuser (pictured below) taking one from another unit and the problem went...
-
-
Lluk8899 replied to the thread Can anyone recognise this camera?.I did manage to get root on that camera by dumping nand flash and replacing root's password in /etc/shadow. Also one can enable telnet...
-
Lluk8899 replied to the thread Can anyone recognise this camera?.OK, I'll reply to myself in case someone lookinh for this info finds this thread. The camera is a generic SSC338Q+IMX415 like this one...
-
-
Lluk8899 replied to the thread Weird glare visible at night..I haven't tried moving it. I tried swithing other nearby cameras off to make sure it is not getting any IR shine into it(there is...
-
Lluk8899 replied to the thread Weird glare visible at night..Sadly it didn't help. I finally got a huge ladder, got up there and I cleaned the front with iso alcohol. During daytime it looks great...
-
Lluk8899 replied to the thread Weird glare visible at night..It isn't. It is this style(with antenna removed and sma connector terminated): The case is metal and it is glued shut, except a small...
-
-
LI have a number of the same type of noname cheap 2.7mm imx415 cameras. All but one are perfectly fine. One, installed recently has a...
-
-
Lluk8899 replied to the thread Is thermal right for me?.For anyone interested as we're also talking about nigh performance of visual imaging sensors here. I checked the Dahua cam from 2019...
-
Lluk8899 replied to the thread Is thermal right for me?.Sadly, the slider in the camera web intetrface goes from 1/1000 to 1/100 and then immediately to 1/10 (but has hundreds of settings...
-
Lluk8899 replied to the thread Is thermal right for me?.What camera model is it? What are the lens parameters? Thanks, the chart could use sensor types too. Not every sensor of the same pixel...
-
LThis chart was developed based on the collective input of many members here with real world experience with many/all of the different...
-
LFor 4MP you want the 1/1.8" sensor and for 4K you'd want the 1/1.2" sensor I'll have to get some IR video later tonight. As I have...
-
Lluk8899 replied to the thread Is thermal right for me?.Pictures would be nice... (prefferably on a dark night) But in principle, yes, I didn't even buy that 30x zoom camera for night vision...
-
Lluk8899 replied to the thread Is thermal right for me?.Surprisingly OK-ish. My cat walking around looks perfectly normal(I haven't seen it running fast yet). When I use the PTZ, there is...
-
Lluk8899 replied to the thread Is thermal right for me?.Do you mean the visible light camera, or the thermal usb c thermal imager? The optical/near IR camera I bought is this one...
-
LThe camera is 4K, it has SONY IMX415 sensor and SSC338Q main chip (according to the seller). It presents such interface: The seller...
-
-
Lluk8899 replied to the thread Is thermal right for me?.I was in similar circumstances and somewhat similar environment. I bought a thermal camera with a 3.5mm lens and it is on its way back...
-
-
Lluk8899 replied to the thread Speed dome optical zoom 5mp camera, not tilting high enough..I hear you about fudging the numbers. I just pulled out of a box one of the non-motorised zoom ptz cameras I bought (these are 8MP and...
-
-
Lluk8899 replied to the thread Speed dome optical zoom 5mp camera, not tilting high enough..Thanks for the reply. The thing is, it never really gets to horizontal if you look at the center of the screen. It goest from vertically...
-
Lluk8899 posted the thread Speed dome optical zoom 5mp camera, not tilting high enough. in IP Cameras.I've got the pictured IP camera with Sony Imx335 sensor and GK7205 SOC. I'd normally not get such a low resolution camera, but this one...
-
