Recent content by luisrodz

I’ll look into it. Thanks Sent from my iPhone using Tapatalk Pro

Thank you so much. I’ll be trying next weekend. I’ll keep you guys posted. Sent from my iPhone using Tapatalk Pro

Hi guys. It has been a long time since my last time around. My whole cam installation have been in hold for a while due to a lot of work and personal stuff. However, I was finally able to mount almost all my cams. I came back due to having one issue. Look at the picture attached. One of the...

@DLONG2 Thank you! That’s what I did and worked perfect. Now I have to create a rule just to allow few devices to access the BI PC when connected at home. Right now all devices can. Sent from my iPhone using Tapatalk Pro

UPDATE: I configured two IP cams and able to see them in BI. I appreciate all help I got from you guys. However, I have several questions: 1. I do still have access to internet on my BI PC. I’m I missing a rule or this is they way it supposed to be? 2. After creating the VPN and users, I am...

I was able to do it after multiple attempts. I did it through the port setting instead of the device. Sent from my iPhone using Tapatalk Pro

I have changed it in both UniFi controller and Network controller in PC. No luck. Sent from my iPhone using Tapatalk Pro

Thank you for your advice. I was able to add my first camera with static IP address to the BI network. Now I’m having issues trying to place the BI PC with static IP to BI network. Despite all efforts it goes under Corporate LAN instead of the BI LAN Sent from my iPhone using Tapatalk Pro

Well, I connected my Camera directly to my BI PC and was able to access it. Changed both passwords (admin and ONVIF) and IP address. I will be connecting it to the switch and see if it works. I just want to make sure that it doesn't access the internet. I'll keep you posted. Thank you...

Yes it shows up in the Topology. I did disabled the BI PC firewall. Didn’t work neither. I tried placing a static IP address and didn’t work. I used Dahua Config tool and it shows up but it appears as “uninitialized”. When I try to initialize, this is the error I get... Sent from my...

Thank you both for replying. It shows up in the topology but can’t ping it. I can ping other devices in same switch. Maybe is the BI PC firewall? Sent from my iPhone using Tapatalk Pro

I’m currently trying to bench test all cameras before I make changes to the network and I’m unable to find the camera. I’m connecting the BI PC as well as the camera to one of the US8 switches (port 8 with pass through). I don’t know what I’m doing wrong. Sent from my iPad using Tapatalk Pro

I just want to protect the system from internet. So I should follow your VLAN instructions then. I’ll try during the week and keep you posted. Thank you for your feedback. Sent from my iPhone using Tapatalk Pro

This is what I have so far. I was planning to add the BI PC as well as the cameras to the 16 port POE switch but I don’t know if that way I can isolate them. I will appreciate your help. Sent from my iPhone using Tapatalk Pro

Hi guys, I just finally got all my hardware to start installing and would appreciate some of your help. I’m going to make a diagram of what I currently have with my UniFi System and would appreciate if you guide me to add my new PC with BI and some Dahua I bought from Andy. Currently I...