Recent content by loudog212

  1. loudog212

    WTB HD-TVI Turrets

    Looking for a few HD-TVI turrets. For use inside and outside at a church. 3 installed in a drop ceiling and 3 in an outside soffit. Currently have domes that look ok during the day but the dome is killing the image at night with IR.
  2. loudog212

    50+ cam install. Ideal video settings?

    On a bigger camera job with a purpose built NVR (LTS/Hikvision). What are ideal stream settings? H264 vs H265? FPS, iframe, VBR/CBR and bit rate? Thank you.
  3. loudog212

    Any experience with LTS NDAA Compliant Pro-VS Series equipment?

    We have one in use at our office and have no complaints. We have also deployed their Pro-X line with good success.
  4. loudog212

    What am I doing wrong?

    Gotcha, That's what I would thinking. Would need that for most circumstances, but fortunately for OP, he said its in a cul-de-sac. Thanks for the info
  5. loudog212

    What am I doing wrong?

    No OP. A few responses here that specify needing two cameras. What is the purpose? One for day and one for night? or are you referring to an LPR and an overview cam?
  6. loudog212

    Wifi PTZ that doesn't connect through an app

    This checks all the boxes assuming you don't need it outdoors. Looks like there is an app but you might not need it https://store.ipcamtalk.com/shop/amcrest-4mp-wifi-ptz-camera/
  7. loudog212

    NVR with good mobile app

    Need to install a few cams for an office building that my father in law owns. I would like to use some decent POE cams from Andy. Would prefer an NVR over a BI PC. Looking for something with a decent app. Cloud connection a plus as I'm not sure I'll have access to the network for port...
  8. loudog212

    Xfinity XCam2

    I've used these cams before. Info can be found in this github https://github.com/edent/Sercomm-API Enable the UI Some cameras don't show a menu by default. This command is used to activate the administration menuon vendor modified firmwares such as Comcast Xfinity, Cox Homelife and ADT...
  9. loudog212

    Best/Easiest UI3 viewing

    I need to set up a local video feed for a user. What is the easiest/best/fastest way to deploy a solution to view UI3? RPi with kiosk mode browser? Tablet? Needs to be a standalone setup with no really user interface. Just needed to view the cameras. Thanks
  10. loudog212

    Where did the horse poop come from?

    Huge pile was left under the car port at my church. Found the culprit. Rainy night in Lancaster, PA
  11. loudog212

    Reolink, Can't connect to UI.

    I have had a Reolink camera working with BI for the last 2 year. I experience the occasional no signal issues that are notorious with these cameras but a reboot usually fixes it. This past week BI shows the camera off line so as I usually do I go to the IP, sign in and reboot. Except this...
  12. loudog212

    Day/Night for LPR

    I will play around with the shutter speed. Thankfully I don't have to deal with motion. The car parks for about 30 seconds to unload expired food and then drives off.
  13. loudog212

    Day/Night for LPR

    Got him! Although dark, LPR was 86% confident of the plate number too. What settings can I change in the camera to help lighten this up for the next capture? Available settings from the camera menu are attached. THANK YOU!!
  14. loudog212

    Day/Night for LPR

    Thanks. Just the one camera for now. There are others covering the parking lot that will capture the entire car.
  15. loudog212

    Day/Night for LPR

    I installed the camera that I linked. But haven’t had a great chance to dial it in. I had someone stop by the other night and the image was pretty decent. The perp also hasn’t been back yet. Ha.
See more
Top Bottom