Recent content by lotusandy

  1. L

    5 MegaGixel 1/1.8" low light destroyer for $90-AVOID LONGSE JUNK

    I have 2 of the LBH48S500 bullet cameras, it is worth having a look at the log from the firmware page as this will show when the cameras re-start.. @nayr, they both re-boot about every 2 hours or so, makies no difference if it is day or night though..
  2. L

    5 MegaGixel 1/1.8" low light destroyer for $90-AVOID LONGSE JUNK

    Not great on the 2 that I ordered, both have since new rebooted every 2-3 hours, after re-booting sometimes they show the OSD clock, sometimes though they don't until the next re-boot. Image quality is very good on one, but on the other the image is considerably more noisy, I would stick with a...
  3. L

    5 MegaGixel 1/1.8" low light destroyer for $90-AVOID LONGSE JUNK

    I purchased 2 bullet cameras LBH48S500directly from Eddy at Lonse via Alibaba, communication was good and they arrived with a couple of weeks, I tested them both on delivery and configured them for my network, but so far have installed only one. The image quality is, as expected great, but...
  4. L

    ARDUINO & BLUE IRIS SERIAL digital i/o DIO

    In almost all cases to open a com or serial port a program needs exclusive access to it, so if you already have a terminal program monitoring a com port then Blueiris will then not be bale to access it & vicaversa.. "How do I get BI to open the serial port? I am using a port monitor and BI is...
  5. L

    Move C:\BlueIris\Log folder

    Click the status icon on the top bar & it's there at the bottom...
  6. L

    ARDUINO & BLUE IRIS SERIAL digital i/o DIO

    Eric, I am using the code you have zipped and it works fine for me with a PIR, as you mention it transmits a hex 01 for a contact closure & a hex 00 for a contact open, (it also transmits hex 00 every 20 seconds of so) this can then be used to trigger recording, alerts etc in BI. Blue iris will...
  7. L

    Update installed, now BI Admin won't start.

    I have the same issue, but just updated to 4.2.3.0 the non admin BI runs fine though.. lets hope it gets fixed soon.. Regards Andy
See more
Top Bottom