Recent content by lingnau

So, the Pole is actually my property and I did also have to pay to have it installed, the only part that belongs to the utility company is the power-meter-thingy (I have no Idea of the correct term for that in English, sorry) Besides the monthly reading that they do, there isn't any maintenance...

Hello @titanmanus I've actually never used web surface updating, only TFTP/recovery update.

We have a brand new DS-2CD2632F-IS that we just installed. From what I can judge it is properly focused. But during the night when it uses its IR leds, from what I can tell the images gets blurry. Is that normal? Has anyone experienced this and does have any tips? Those are the full resolution...

I've never heard of this "Vera" but anyway if you want a screenshot of the current image on the camera: http://admin:12345@192.168.100.64/Streaming/Channels/1/picture I would guess: URL: /Streaming/Channels/1/picture user: User Password: password MAC: no idea? IP: 192.168.100.64:80 Try that.

I never knew you could do that with Hikvision's cameras. Got my attention. I've tried it here and none of those URL's worked(After adapting IP, name and password). :(

I think the support for the camera is aluminium, the whole body is. The pole is made of concrete. I'm using FTP cable/connectors and I'm waiting for my ubiquiti's surge protector to arrive, I plan to ground it together with the switch and everything else, the camera doesn't seem to have a ground...

It's actually made from parts from an 4U rack, I took the rear 19" "rails" (Like these http://www.allmetalparts.co.uk/c/15-category/network-rail-rack-strip-audio.jpg), made a little custom metal frame and fixed both to the ceiling leaving 19" of space in between. It was cheap and just works. :)...

The camera motion detection didn't work very well(Synology's fault probably), so I just went with the Surveillance Station detection. I'm using Sensivity 96 and Thresold 6 for my cameras, that gave me best results. It's not very good but it works, It's sure not worth what synology tries to...

Finally pulled the last cable and set it all to work. Cameras: 2x Hikvision DS-2CD2132-I @ 2.8mm 2x Hikvision DS-2CD2232-I5 @ 4mm Networking: TP-Link - TL-SG2424P (24x Gig POE 802.3af/at) Synology DS-412+ NAS Running Surveillance Station 6.3-3380 This is a printscreen from the NVR showing all...

It's permanent.

Did you try to apply this 5.2 firmware using TFTP or how? The latest cameras I've bought are all 5.2 and english already, so no experience with what you're describing.

After this firmware update, mine are in english: http://www.ipcamtalk.com/showthread.php?1078-Firmware-5-2-0-in-English

Once you have the recovery software running on a PC on the same subnet with the correct IP address and the firmware image you want to apply, you can power them off and then on one at a time, each on of them will then download the file from the TFTP and apply the older firmware. The problem is...

I've added a link at the first post, but here it is: http://www.hikvision.com/UploadFile/File/201433116851896.pdf

Haven't found any version where it doesn't work. Just remember that it has to be updated through tftp firmware recovery.