Recent content by leony

Most likely CCA. It is a light weight standard Cat5e cable.

Hi Both RJ45 ends I changed, crimped 3 times, no 5 pin has not lit up in all instances. It is really weird, all lights were working before I touched the ends. And why pin 5 gave error every time? The cable itself seems behaving inconsistently in tests so can't figure out. I don't think with...

I tested the cable again with another laptop with Gigabit Ethernet card. Strangely the speed was 10mbps. So I tried to crimp the ends myself again and after 3 times of crimping, same pin no 5 light never came on strangely and I gave up. Basically I want to install 2 cameras at 100m: If I buy...

Hi, I tested the cable plugging to our normal gigabit switch and made a speed test. The speed came as full our internet speed (80mb Download + 20 upload) As far as I remember the data speed was 100mbps, but it would be down to the laptop itself, it may or may not have a gigabit ethernet card...

Hi, We have DS-7600 Series NVR + DS2CD2T55 IP Cameras. All cameras are working fine, (they are powered through Ethernet cable (POE)) except the one which is approximately 100m away. On the cable it says Cat5E + UTP + 24AWG The steps I have followed for trouble shooting: - I used a cable...

Thank you. They supply a transformer kit ( at least in the UK) . Does anyone know what it is rated? So maybe I can arrange a similar plug-in AC - DC power adapter.

Hi Does anyone know what is the voltage and current rating for this doorbell? Basically I cannot use a transformer and would like to an adapter instead (My current doorbell has 15V and 1.2A adapter). It doesn't have to be this particular adapter, I will only power the DB1C and nothing else...

Hi Does anyone know what is the voltage and current rating for this doorbell? Basically I cannot use a transformer and would like to an adapter instead (15V and 1.2A). It doesn't have to be this particular adapter, I will only power the DB1C and nothing else. I asked Ezviz and they are not...