learningtocode42's latest activity
-
Llearningtocode42 replied to the thread Camera locations for future house.Hello again! So the prewire is about to be done and the installer wants to install electrical boxes with wall plates where the cameras...
-
Llearningtocode42 reacted to samplenhold's post in the thread Camera locations for future house with
Like.
Unless you focus the cam to be at the end of the driveway, it will probably be too high to see a face. -
Llearningtocode42 replied to the thread Camera locations for future house.That part I understand, just per your initial post: Cam 4 use a Motorized IPC-T5442T-ZE or IPC-T3241T-ZAS, based on budget. Cam 5 for...
-
Llearningtocode42 reacted to EMPIRETECANDY's post in the thread Camera locations for future house with Like.
IPC-B5442E-Z4E can reach 90ft IPC-HFW5241E-Z12E can reach 120ft hIgher can get better view ;)
-
Llearningtocode42 replied to the thread Camera locations for future house.Was referring to IPC-T5442T-ZE in spot #4, not LPR on #5, unless I'm reading wrong? If so, apologies!
-
Llearningtocode42 replied to the thread Camera locations for future house.Btw, framing has started, so pre-wiring should be in a month or so! Jut showing the wood if anyone's curious on the build process.
-
-
Llearningtocode42 replied to the thread Camera locations for future house.Per numerous comments from others, wouldn't #4 be too high for ID those who come up the driveway if by the soffit? It's a rather flat...
-
Llearningtocode42 reacted to EMPIRETECANDY's post in the thread Camera locations for future house with Like.
I don't think the front side need such qty cams, Cam1 use a PTZ with a corner wall mount, can get very good view, use SD49225XA-HNR or...
-
Llearningtocode42 reacted to samplenhold's post in the thread Camera locations for future house with Like.
Usually if the cams are not looking across the light, it will be fine. But the only way to tell is to test it.
-
Llearningtocode42 reacted to samplenhold's post in the thread Camera locations for future house with Like.
Don't be too quick to dump cam locations. Multiple views of the same area is a good thing. Due to a number of environmental reasons, a...
-
Llearningtocode42 reacted to Flintstone61's post in the thread Camera locations for future house with Like.
Taken from another thread. I think it's a good way to get faces. Shrub Cam could be #4? or #5
-
LGiven the facade of the home I would ask you to seriously consider the type / style of cameras you intend to use. A standard LPR camera...
-
Llearningtocode42 replied to the thread Camera locations for future house.Good idea - the corner between garage and entry door will be some sort of shrubs/flowers, etc. So potentially can put it there, marked...
-
-
Llearningtocode42 replied to the thread Camera locations for future house.Here's an updated plan. 1: LPR 2-8: PTZ? 9: General view 10: Flood Light With this set up I'm not sure I'll need all of #2, 3 and 4...
-
-
Llearningtocode42 replied to the thread Camera locations for future house.Makes sense! Thank you for the advice!
-
LJust for clarity sake my reply regarding the dedicated 20 amp outlets was to highlight this important area. Since everything will be in...
-
Llearningtocode42 replied to the thread Camera locations for future house.It will go in the basement, which is currently unfinished, so it's up to my imagination where to put it there once it's finished. If we...
-
Llearningtocode42 reacted to mat200's post in the thread Camera locations for future house with Like.
Hi @learningtocode42 Did you get a nice data center / closet setup on the floor plan?
-
Llearningtocode42 replied to the thread Camera locations for future house.I was going to potentially go with the vendor's cameras (from what I have been told 1080p varifocal Speco cams) but given uncertainty on...
-
Llearningtocode42 reacted to The Automation Guy's post in the thread Camera locations for future house with Like.
Are you having to pay someone to do the prewire or is this something they builder will allow you to do yourself. I totally agree with...
