Recent content by KyleRiemen

  1. K

    is there a "generic" firmware available for Hi3535 based NVR? (owsoo branded)

    Does the NVR have network connection? Use serial and try to ping internal and external networks.
  2. K

    is there a "generic" firmware available for Hi3535 based NVR? (owsoo branded)

    You should tell what was causing the issue and how you solved it, for other people.
  3. K

    is there a "generic" firmware available for Hi3535 based NVR? (owsoo branded)

    Seems like setenv works, but saveenv does not. What does the serial output say when trying to saveenv? Is the command maybe not implemented? Try with "help" to list available commands and make sure saveenv is existant.
  4. K

    is there a "generic" firmware available for Hi3535 based NVR? (owsoo branded)

    You set the boot args and it did not help? Because your printenv shows, it is not set.
  5. K

    is there a "generic" firmware available for Hi3535 based NVR? (owsoo branded)

    You should can put all files to root directory (no subdirectories). If a usb-stick is attached to front-usb input, it will check if the specific update file is existant, if not, it will continue boot like normal. What does the serial output say? Also looking at your bootenv, bootarg and bootcmd...
  6. K

    is there a "generic" firmware available for Hi3535 based NVR? (owsoo branded)

    l You put the files into the root director of fat32 formatted USB, put the stick into the front USB Slot and start the NVR. Watch serial output, if the updater can find the updatefile it is looking for and if it does not find the file, it will output, which file it was looking for.
  7. K

    is there a "generic" firmware available for Hi3535 based NVR? (owsoo branded)

    Why not try to update via usb? Have you checked your boot enviroment and set serverip?
  8. K

    is there a "generic" firmware available for Hi3535 based NVR? (owsoo branded)

    File should be the one attached
  9. K

    is there a "generic" firmware available for Hi3535 based NVR? (owsoo branded)

    Nand ID: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 No NAND device found!!! 0 MiB I haven't seen this in any one else's log. Maybe Nand faulty? Dunno... But uboot seems to work, maybe an SPI Flasher can help you aswell. Which command did you use for TFTP flash? It should go like this sf probe 0...
  10. K

    is there a "generic" firmware available for Hi3535 based NVR? (owsoo branded)

    Why are flashing via tftp? Are there any problems with flashing via usb?
  11. K

    is there a "generic" firmware available for Hi3535 based NVR? (owsoo branded)

    It is J1
  12. K

    is there a "generic" firmware available for Hi3535 based NVR? (owsoo branded)

    I know, but it may now, coming from a new firmware. There is no risk anymore right? ;) I would just try once more, just out of curiosity.
  13. K

    is there a "generic" firmware available for Hi3535 based NVR? (owsoo branded)

    with usb, like initially.
  14. K

    is there a "generic" firmware available for Hi3535 based NVR? (owsoo branded)

    I think, usually the uboot will not be overwritten when flashing. But now since it is working you could try out to update via recovery ;)
  15. K

    is there a "generic" firmware available for Hi3535 based NVR? (owsoo branded)

    Does it really have to be exactly for this NVR? I found this thread for the same chip "MX25L128XX" and same CPU (Hi3520D), someone posted a uboot dump. MBD6704T-EL поделитесь uboot & env, пожалуйста. : Восстановление и настройка • Форум по системам видеонаблюдения, безопасности, пожарным и...
See more
Top Bottom