Recent content by kkilloy

Good advice. I5-3470, 8gb ram, ATI video. Only used with Blue Iris and nothing else. CPU under 40% with the four cameras. If I use an NVR, I thought I would be able to record at full resolution if I every want to review any video. BI system is working hard when fps and resolutions set higher...

I have used Hikvision, Dahau and many junk cameras. At this point, I can say that I am very impressed with the build quality, ease of use and price of the SV3C ip camera. Time will tell if it is junk, and I will let you know. Did you happen to read the question I asked?

I want to record 24/7 on all channels. I use BI for Motion only. I will continue to us BI at the same time.

I just installed four SV3C 5mp ip cameras. Very pleased with quality and price. Setup with Blue Iris and working well. Can someone suggest an 8 channel NVR that works well with the SV3C cameras. No poe ports needed on NVR. The poe injector is in the wiring room and the NVR will be connected...

Thanks for the reply. I really like the Onvif Device Manager Program. Great instructions, easy to use. I was able to see the camera. It also works on my system now. I will see if it keeps working.

It has been working for over one year. Lost video today. Wire test ok. I can ping. SADP tool sees it OK. Is it just a failing camera? The camera that is failing ends in ip address .39. Thanks for the help.

I resolved my problem using ivms-4200. Went to device management ---- server ---- remote configuration ---- system maintenance ---- restore default settings. Now I can log into the camera using internet explorer.

It worked for two weeks logging in with IE. Now I get "this page can't be display". I can ping the static ip of the camera 192.168.1.37. It works in Blue Iris and IVMS4200. SADP sees the camera and can change settings. Is there a reset? The second camera on 192.168.1.36 works in IE. Attached is...

When I try remote in using IE11 from a location away from my home using my static WAN ip address, it brings up a page and lets me sign into my Hikvision DS-2CD3345-I camera and not the Hikvision 7608 NVR. Do I need to change a setting on the camera? My port forwards in my router only point to...

I found the attached specs listed for the hikvision 7600 series nvr. Does this mean it is not possible to record continuously on 8 channels at 3mp, 15fps, 2048 bitrate?

I have a Hikvision DS7608NI-E2 NVR. (2) hikvison 4mb, (1) hikvision 3mp and (4) eyserv (dahau) 3mp cameras. Using IE11 on my I5, 8gb ram, W7 pro to view the cameras has cpu pegged at 100% the entire time. All cameras are set to max resolution, 15fps, 2048 bitrate. I am new to hi res ip cameras...

I have upgraded to 3.4 and I still cannot see the camera on the NVR. I have a second DS-2CD3345-I camera that I added to the network. After several minutes both cameras started working. Go figure that, I have no idea why.

Thanks for the suggestion. I will try the firmware update. Where is the best place to download the firmware for DS7608NI-E2 NVR? Is v3.3.4 the latest?

I can view the camera at an ie11 webpage. It worked with an Ion-NVR-8 I was using. I also have a hikvision DS-2CD2032F-I and 4 eyeserv ESIP-APEX3-BT2 3MP cameras that all work on the hikvision DS-7608NI-E2. I have attached pic of firmware page and the "live view failed" message. Thanks for any help.

I am configuring the DS-2CD2032F-I with IP address and video, time settings. How long will it hold these settings once they are unplugged from POE?