Recent content by kdelci

  1. K

    Help DVR Hybrid series DS-9016HFI-ST

    To answer the question I am using hyperterminal software and putty in serial mode. When do I start the DVR on the serial port I have nothing no activity, alastairstevenson has probably reason may be that this serial port is used to send commands at last I know, but he does not speak. I think...
  2. K

    Help DVR Hybrid series DS-9016HFI-ST

    Thank you I tested the voltage 5V and I have it is TTL, was not worth buying a converter I have a maxim max232 and a plate of electronic test I'll probably do it tonight and you stay current
  3. K

    Help DVR Hybrid series DS-9016HFI-ST

    Sorry
  4. K

    Help DVR Hybrid series DS-9016HFI-ST

    Thank you for the information. but I do not understand however is the RS232 port on my DVR if it is useless? In the description it is written RS232 port for maintenance and configuration? On the circuit it s this white connector is composed of 6 pin Thank you
  5. K

    Help DVR Hybrid series DS-9016HFI-ST

    Hello back after several test, and always the same econt_Vision-AV2000. I tried a connection directly right and crossover cable, I used a switch to connect the PC and DVR IP address 192.0.0.128 /255.255.255.0, answer ping 192.0.0.64 is ok. I have disable my firewall and restart several times...
  6. K

    Help DVR Hybrid series DS-9016HFI-ST

    I tried several times without success. Tomorrow I will use a RJ45 cable cross type, we will see what his situation. I attached a picture below.
  7. K

    Help DVR Hybrid series DS-9016HFI-ST

    To ignore it is necessary to do what? wait because this error after the transmisson of digicap file; dav does not make it blocks this error aercont
  8. K

    Help DVR Hybrid series DS-9016HFI-ST

    Yes the DVR works but has big slowdown and VGA / HDMI's username was empty. And I tested on another DS-9008HFI-ST model in operation and even Arecont problem with tftp. So if it comes from the TFTP server (pc), I have to use another program that tftp Hikvision? On the data sheet DS...
  9. K

    Help DVR Hybrid series DS-9016HFI-ST

    Hello thank you for the answer. SADP captures well the DVR with IP 192.0.0.64 on port 8000. For serial com 115200bauds configuration, 8 bits without control. you say just ignore but how?
  10. K

    Help DVR Hybrid series DS-9016HFI-ST

    Hello, Hybrid DVR DS-9016HFI-ST (RS232 Serial Port integred). I end up with a problem since an update. The login list is empty, as if there were no more registered users. No more means more users in the database. I tried to connect the DVR with Hikvision tftp: - Ip laptop: 192.0.0.68 /...
See more
Top Bottom