Recent content by Kandeman
-
K
WAN access for NVR PoE Camera
I put my existing gateway into Bridge Mode and added an ASUS router and email now works fine from the camera's using virtual host and a static route. Thank you Alastair for all your help. -
K
WAN access for NVR PoE Camera
So I've been able to get an SMTP relay working on my NAS and can send email from my phone via the relay but the NVR still fails "Testing Failed" I have tested NTP with the IP of my NAS time server and that works but email doesn't. I have it setup as simply as I can e.g. no mail encryption and... -
K
WAN access for NVR PoE Camera
I spoke with some techs from work and the issue with the modern is not solvable without putting it into bridge mode and running a seperate router, given we are close to changing to docsis 3.1 I'll be due for a new modem soon -
K
WAN access for NVR PoE Camera
Would running SMTP forwarding on my Synology NAS help to resolve this issue. -
K
WAN access for NVR PoE Camera
I found this which applies to my modem but I struggle to understand if a) its the reason and will help 2) how to implement iii) sequences Netgear C6300BD Guide to Setup Static Routes on Telstra Gateway Max C6300DB Purpose This guide will describe how to workaround a setup for static routes... -
K
WAN access for NVR PoE Camera
So on my PC on the normal network: ipconfig /all IPv4 Address. . . . . . . . . . . : 192.168.0.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . ... -
K
WAN access for NVR PoE Camera
Hmmm realised that I missed the tracert and went back to repeat the process and got a different outcome for the first test. Let me run these tests again and re-record the results. The main difference was for the first test results were the same as test 3. -
K
WAN access for NVR PoE Camera
ok let's play Bamboozel.... Baseline test PC using DHCP 192.168.0.7 IP 255.255.255.0 SN 192.168.0.1 GW 61.9.134.49 DNS1 61.9.133.193 DNS2 I set the PC to 192.168.0.7 IP 255.255.255.0 SN 192.168.0.1 GW 192.168.0.1 DNS1 8.8.8.8 DNS2 and 192.168.0.7 IP 255.255.255.0 SN 192.168.0.1 GW... -
K
WAN access for NVR PoE Camera
I tried to enable SSH (Is SSH or telnet available in 5.4.5?) but get connection refused when I try and SSH to it. I had a look through the entire console and couldn't find anything like a ping or trace that might help. -
K
WAN access for NVR PoE Camera
When I turn v-control off I can no longer access the camera via 192.168.254.2 but can when I turn it back on so that seems to be working. -
K
WAN access for NVR PoE Camera
Can I not get email working on a POE camera then? -
K
WAN access for NVR PoE Camera
Surprisingly that didn't work, using the IP address for both the NTP time (time.windows.com / 52.166.120.77) and email server address (smtp.gmail.com / 74.125.23.108) achieved the same result. Failed to connect the test server! To summarise: Network Gateway IP 192.168.0.1 NVR LAN IP... -
K
WAN access for NVR PoE Camera
It does sound like a DNS issue which results in the test not being able to connect to either the NTP or gmail server. If I run a tracert for smpt.gmail.com and then use the IP address instead and it works would that confirm that I have a DNS issue?