Recent content by Jurgen Willems

  1. Jurgen Willems

    Hikvision SADP Timeout problem after changing HTTP-port

    Hello guys, I found a solution to my problem but in a completely different way. Opposite from what I found on the web there is a reset button on my cam. I just had to pull off the cam protection cap - unplug PoE power supply - push Reset button - hold button for at least 30 seconds whilst...
  2. Jurgen Willems

    Hikvision SADP Timeout problem after changing HTTP-port

    PC is on a wired connection. As far as I know there is no network access protection tool running. On the other hand the camera's are connected directly to a PoE-switch and there is another switch between the PC en the PoE-switch. I will connect the PC directly to the PoE-switch and see if it...
  3. Jurgen Willems

    Hikvision SADP Timeout problem after changing HTTP-port

    Nothing is showing automatically ... Ik have to add manually cam per cam. I added a screenshot from SADP. The computer internal IP is 192.168.1.102 so they are all in the same range.
  4. Jurgen Willems

    Hikvision SADP Timeout problem after changing HTTP-port

    Thank you for your answer! It was worth the shot ... Unfortunately still not working. I can connect to the 4 cams on HTTP-port 80, but I get an error message when trying to connect to the other two. It says there is no ending point listening that can accept the message.
  5. Jurgen Willems

    Hikvision SADP Timeout problem after changing HTTP-port

    Hello, I was experimenting with port forwarding and changed the HTTP-port from 2 out of my 6 cams. Worked for a small period but my 2 cam's afterwards somehow disappeared . No way to log on using internal or external ip, even via the https (which I did not change) i was not able to connect...
See more
Top Bottom