After I updated to the last update 5.2.1.4, I am experiencing random camera feeds freezing in Blue Iris. The camera itself is still functioning correctly and if I restart the camera in Blue Iris it starts working correctly again. I was wondering if anyone else has experienced this and if I may...
Are you having any issues with bitrate or resolution? The reason I ask is I have a hikvision panovu 4x5 dome that I can't seem to get to work correctly with Blue Iris. If I raise the bitrate any higher than 512 kbps I get artifacts and loss of picture. I'm looking for a replacement and came...
Do the multi sensor Dahua cameras work well with Blue Iris? I currently have a hikvsion 4 sensor panovue camera that just does not seem to want to work with Blue Iris. Unable to get good resolution feeds at any bitrate above 512kbps.
I have been running a similar setup for about 3 years now. I have 5 servers running blue iris with a total of 116 cameras. I just recently included a NAS with 180TB of storage. I also have a sixth server with blue iris that does not record. I set it as a "streaming server" which only streams...
@fenderman..... I can confirm that what spiro is saying is true. I have a setup where I have 4 blue iris servers connected to each other. After the last update, 4.8.2.5, two of my servers lost connection to each other and I was unable to resolve the issue. Just for giggles, after seeing this...
Do you have any experience with the new Blazer Pro All-in-one server? I am finding it very hard to find any full documentation, and am having some set up issues.
Combined views
I have a question. I'm not sure if this could be done, but could there ever be a way to combine views of cameras from two different servers? I know that currently there is a way to manage different servers from one ui2 instance, but I have some special situations that it would be...
The original question was referring to remote viewing of cameras running on BI. UI2 is a web viewing system developed for BI. It can be found here: https://www.ipcamtalk.com/showthread.php/93-I-made-a-better-remote-live-view-page
I run a raspberry pi using Ubuntu Mate, automatically running...
I have several remote tv's set up with a raspberry pi running the UI2 web browser. Upon boot the PI's automatically pull up the cameras in full screen.
Thank you very much. That worked perfectly. Is that something that has to be done for every camera to work in this manner, or just these specific cameras?
I have about 12 trendnet tv-ip310pi cameras running on blue iris. I was attempting to set BI to use the hardware motion detection of these cameras, but I have been unsuccessful. Has anyone else been able to do this or have any advice as to any settings I may be missing?