Recent content by Jim Armour

  1. J

    access actual camera management via DS-7604NI-E1 NVR

    Thanks Carcus. I had a response from another post earlier that suggested the same thing. Oddly enough that option was not available in my version of the firmware. The person that also suggested the virtual host was from Australia. The US and Canada Hikvision sites actually have older...
  2. J

    Disable IR on IP cam

    Thanks achernar. So it turns out the Hikvision Canada page is not as current as some other countries. Even the firmware is older than the US site. The manuals on the US and Canada site are totally different than those on the Australia site. I just went to Hikvision Australia and the manuals...
  3. J

    Disable IR on IP cam

    Thanks David, Too bad i didn't find that post earlier I had someone suggest to me to connect a laptop to one of the poe ports and create a static IP and subnet on the laptop. I was going to try that as a "plan C" since the NVR is well concealed on the top shelf of a closet and connecting...
  4. J

    Disable IR on IP cam

    First of all, Thanks to achernar, Trax95008 and alastairstevenson for your support on this post. Here's the update. Firmware : V3.4.3 build 160822 Web Version 4.0.51 build 160822 I logged on via the web interface when i got home and managed to find the Network Settings > Advanced > Virtual...
  5. J

    Disable IR on IP cam

    Thanks for responding to this post alastairstevenson. I don't think I set the gateway to 192.168.254.1 so that may be the key. I was sure I saw 0.0.0.0 in SADP for gateway but maybe it didn't refresh or something.. So if I set the IP/Gateway using SADP back to what the NVR is expecting to see...
  6. J

    Disable IR on IP cam

    I tried changing it back to the camera (out of the box) default of 192.168.1.64 but out of the box the default gateway shows 0.0.0.0 which the SADP won't allow me to set. I also tried to set it to 192.168.254.3 for the POE port i am using for that camera. I also tried to enable DHCP and none...
  7. J

    Disable IR on IP cam

    Thanks. I will look at this when i get home. I only have remote access via the IVMS 4200 client and that option is not there. However, the manual I have for the DS-7608 does NOT show sections like 11.2.11. It is just chapters. Chapter 11 is NVR management and shows nothing about configuring...
  8. J

    Disable IR on IP cam

    I have a Hikvision DS 7608 NVR with 4 Hikvision cameras. I need to disable the IR on one of them but the option is not available via the NVR web interface or the IVMS 4200 client. If I use SADP to modify the camera IP then i can connect it to my network, log on to the camera directly and...
  9. J

    access actual camera management via DS-7604NI-E1 NVR

    I have a Hikvision DS-7604NI-E1 NVR and 4 X 2MP IP Hikvision DS-2CD2122FWD-IS-2 cameras. The NVR web interface and the actual NVR interface do not give full access to all the camera features. Even the IVMS-4200 software does not give access to all the camera features. Is there a way to access...
See more
Top Bottom