Recent content by jarrow

  1. J

    VTO both locks not opening with tag

    Haven't tried that because I didn't want to have to install a second RFID reader for my client.
  2. J

    VTO both locks not opening with tag

    Nope, the distributor told me its simply not possible with this arrangement.
  3. J

    VTO both locks not opening with tag

    Hi all, I have a VTO4202F-P-S2 with two button and Mifare modules (VTO4202F-MB2 and -MR), a DEE1010B-S1 extra door lock opener which are combined with a VTH5421HW display. What I want is to be able to open the two doors when presenting one Mifare tag. When I add a tag, I can 'enable' both...
  4. J

    Dahua AI NVR SMD problems

    I personally think its a bug in the firmware, that the SMD events are incorrectly being labeled as MD events. The notifications can be matched to motion detection events in the timeline, while the notification says 'Human motion detection'.
  5. J

    Dahua AI NVR SMD problems

    Like indicated in post #1, that all works. So its indeed something with the NVR. Think factory reset would be the best course of action indeed, thanks.
  6. J

    Dahua AI NVR SMD problems

    Yes did that too. I just got a first SMD event by turning the sensitivity of MD all the way down to 1. I only get the event as a notification in DMSS, but can't find it using AI search or when searching for SMD events by using playback in both DMSS and the recorders GUI.
  7. J

    Dahua AI NVR SMD problems

    Yes did all of that. To clarify, I have over 30 recorders running as a installer, but haven't encountered this problem before. This is also the first NVR5216-EI I've installed for a client who had a NVR5216-4KS2 before which died (after 7 years). Told him that the more expensive unit would give...
  8. J

    Dahua AI NVR SMD problems

    Yes exactly, but IVS by recorder only allows for 4 channels and I'd like SMD on 8 channels... So using IVS instead of SMD isn't really an option. Any tips to try? I've had all IVS rules off and tried SMD but not a single event comes through, not even the ones from the cam with built in SMD.
  9. J

    Dahua AI NVR SMD problems

    IVS by recorder does work on one of the old cams, but only with SMD disabled.
  10. J

    Dahua AI NVR SMD problems

    Thanks @Mark_M! Yea I had the yellow MD activated. When I try to activate both, the other gets deactivated. I'll try in MD&Alarm for a while. Motion detection was on.
  11. J

    Dahua AI NVR SMD problems

    Hi, I've got the new NVR5216-EI NVR with firmware DH_NVR5XXX-EI_MultiLang_V4.000.0000000.1.R.230620. Connected are 10 older Dahua cams without AI capabilities (HDW2320R-ZS) and 1 HFW5442TP-ASE. The cams are all added to the recorder as 'Private' (no ONVIF). Now the problem: I can't get SMD to...
  12. J

    Remote connection to NVR without static IP

    To update: I've been running an NVR4208-8P-4KS2 connected to a RUT241 and P2P uses just under 7 MB a day when idle (so no viewing). So it's not as bad as other people have said.
  13. J

    Remote connection to NVR without static IP

    The Teltonika RUT240 has built in ZeroTier capability and also offers about 25 DDNS services. I did read that since 6 months ZeroTier has a update with ZeroTier Low Bandwidth mode, but I'm not sure if that has been rolled out to the Teltonika routers. I found a provider which offers 5 GB a...
  14. J

    New Dahua DMSS Mobile App Problems

    Not too long ago I noticed my phone suddenly displays the 5G icon at the top (while I only have a 4G (LTE) plan, so free plan upgrade I guess?), but since then I noticed the load times on mobile data are a lot longer with DMSS. That's why I forced my phone to use 2G/3G/4G instead of 2G/3G/4G/5G...
  15. J

    Remote connection to NVR without static IP

    I've got a location with an NVR without internet connection. I want to place a 4G/LTE router (Teltonika RUT240) with a SIM card and a data plan of 1 GB (which is within the budget). Client only wants to view the cams whenever there has been an event, so very rarely. Now this SIM card doesn't...
See more
Top Bottom