Recent content by jaredtizzle

Bug: Settings tab labeled wwww

Update: Created a simple workaround with PHP. Running from CLI, it checks the alarm status from the camera every second, and triggers BI if there is an alarm from my PIR.

So I've been doing lots of research on the fps dropping in BI when it gets triggered. My cameras would go down to anywhere from 10-0 fps. This would last about 10 seconds and I had no idea why. Spent lots of time in perfmon, and I had recently used a "CPU Unparker" for my gaming rig. What it...

CPU% seems very off to me...

I've actually had lots of issues with my 2960, it seems to drop lots of packets due to a FCS issue. Never looked too hard into resolving it because I had an old linksys switch laying around that worked. Try swapping the switch out with something else. Edit: Just to clarify, my cameras were both...

Using my DS-2CD2132F-IS(V5.2.5 build 141201) I get external triggers in BI using the line crossing detection. Does anyone know how BI checks for the external alarm? Is it just the xml from http://192.168.1.11//IO/outputs/1/status This keeps showing up in my log. No idea what it means...

64 bit Win7 with 64 bit BI. Might be a x64 problem.

Confirmed that the camera is sending emails when the PIR is triggered. Seems to be a BI problem somehow..

You unscrew the cap from the front, then there are two little sticks with a slot for a flathead screwdriver. One adjusts the lens and the other is focus. This video may help

I don't know how BI pulls the events for each camera. But I've forwarded the input->output and It seems to work correctly. http://192.168.1.12/IO/outputs/1/status - - - Updated - - - Yes. I did that again just to make sure BI had all the info it needed for my camera. It identifies it as...

It must be a config thing with the camera/BI. The connection is there, I can see the relay change states when it triggers with a MM. The camera just doesn't seem to throw the alert to BI. Checking the xml I get this: http://192.168.1.12//IO/inputs/1/status Active only appears when the PIR is...

maybe im an idiot.. this wiring looks correct to me... Don't mind that i'm using pairs from a cat5..lol.

Deleted it and started again, removing the motion areas for now did the trick.. Still can't get the PIR to trigger it though. Using a piece of wire to short the connection to ground. Camera doesn't seem to be recognizing the change. Using an external POE injector to eliminate power problems. PIR...

Hell, now my front door camera won't even trigger from motion. I've been moving it around while i'm checking connections and BI isn't triggering for anything :(

So, I've purchased a PIR for my camera on my front door and I'm trying to setup the alarm input. I've tried shorting the pins manually, and I still don't get a trigger. Even with the FTP upload setup on the camera to a FTP server on my pc, I don't get an image sent. Any idea what I'm doing...