Recent content by Jakc

This guide helped me tunr settings for CodeProjectAI

Is there a guide on how to setup the ipcam models?

Same issue here - 5.7.4.1 Initialized Connecting Connect error 10061 Shutdown

I’m getting multiple recommendations over on Reddit to avoid hdd altogether. And that ssd reliability for continuous read write is now ok. Need to see if I can find any benchmarks for tests for rhatX

Thanks for that, didn’t spot that one in my searches. Description suggests is can handle 4 cameras always on. I was hoping there might be a recent Purple version in a 2.5 size. Points notes about the NUC. Have been hunting for a SFF Optiplex or HP Elitedesk but this NUC was gifted and seems...

I have three 4MP cameras. And been gifted a tall Intel NUC - nuc8i5beh, with a 500GB m.5 and 8GB of ram I intend on setting this up primarily for Blue Iris, fairly basic workflows and will follow cliff notes for optimising. Might add on home assistant and plex via docker if cpu has wiggle...

Thank you so much for a detailed reply and also this whole thread where you shaped what I purchased. Will hop on the computer tomorrow evening and run through your approach to configure on the camera end. I will report back with new stills.

T5442 out the front. Will be doing more config once other two cameras are up later in week and have blueIris installed. However, any tips for improving night visibility? That shot is with a garage exterior light on.

I have a Dahua turret camera as well as a couple mounting options. 1x waterproof junction boxes 1x Water-proof wall mount bracket I am struggling to work out best spot to position this corner camera. In reference to below photo: 1 & 2 are the corner of my property, 2 being the shared wall...

Shipping cost to melbourne?

That helps a lot, especially the power supply photo. Will try to source some simpler wiring diagrams from the web, but I have a bit of an idea from your one.

Was close to taking the easy/lazy option and going down the Eufy route. However, from reading this thread I am now leaning to putting in an order for a db61 from Andy (when back in stock). Live in Australia. Current traditional doorbell has power running to it (light is on), but for some...

ok, shopping list looks good. andy has helped refine mount choices as well https://www.aliexpress.com/item/1005003522847209.html?spm=a2g0o.store_pc_allProduct.8148356.1.79065f03DRzD1c

Thanks. I was a bit fixated on getting a bullet for the corner, but not entirely sure if its neccessary. I assume it might have better range, but reading up, sounds like I would be fine with a dome, such as the one you mention above.

Stock issues trying to source a bullet varifocal. Any thoughts of the below option mentioned by Andy for my rear corner? IPCT-HFW5231RE-IZS 4 MP IR Varifocal Bullet Network Camera - 4mp too, 1/1.8cmos