Recent content by j4c3

I have the same model. Try <ip>/cgi-bin/mjpg/video.cgi?channel=1&subtype=1 Make sure SubStream 1 is enabled, and the Encoding is MJPEG.

This isn't going to help, but I have two cams on the SAME firmware, and one live view works and one doesn't. Does work: Device Type: IPC-HDW5231R-ZE System Version: V2.800.0000015.0.R, Build Date: 2020-04-30 WEB Version: V3.2.1.887241 ONVIF Version: 16.12(V2.4.3.822559) Does not work: Device...

I had it connected to an wall adapter. But, no good over PoE at this point either. But, the lens and ir half should still be good, if anyone needs parts.

I have a cp2102 usb to ttl, and a connector that fits JP1. I'll just need to crimp some connectors on the other end. Edit: Eh, nm. I had it sitting open and a coworker came over to look at it. Now I'm not getting the IR or network leds to light up when I plug it in. So, I think it was...

I'm GMT -8, Portland. Neither of those produce any results. (0 hosts up). I do have some managed switches here, so maybe later I'll put in a port there and see if I can watch what it does.

Okay. I put them isolated on a hub, and tried to wireshark it. 4 51.987700 Hangzhou_e1:42:e5 Broadcast ARP 60 Who has 192.0.0.128? Tell 192.0.0.64 5 51.987797 Microsof_9d:17:60 Hangzhou_e1:42:e5 ARP 42 192.0.0.128 is at 58:82:a8:9d:17:60 6 51.988245...

A DS-2CD2332-I. PC is changed to 192.0.0.128. To start I was on another network, and using PoE. Now, I am powering with a wallwart and connected directly to the PC via a crossover cable. Generally, I cannot ping the camera, but I did run a ping -t and reconnected the camera. I get one or...

I've attempted this, and I might be looking at a brick. First try, I was able to upload the brickfix2EN.dav file, and it said System update completed. Then I rebooted the camera, and... nothing. I'm never able to telnet to it. And attempting to reupload a dav file with the Hik TFP server...