Recent content by iMx

  1. I

    Acquired a 'bricked' DS-2CD6362F-IVS

    First boot... eth0 was not up, nor did it have an IP assigned. Only ports listening were for telnet: Manually assigned an IP to eth0, brought the interface up, flushed iptables, and now have a telnet login: No 'upgrade' binary in the bin path, so tftp from busybox and running upgrade is...
  2. I

    Acquired a 'bricked' DS-2CD6362F-IVS

    The traffic dump was taken from a switch port mirror, no firewall - packet capture running on a server is usually pre any firewall, as it is from the interface, firewalls are usually software, even if a firewall were blocking the initial inbound request should still be seen (but with no...
  3. I

    Acquired a 'bricked' DS-2CD6362F-IVS

    1.25 arrived this morning, cable is definitely 1.5!
  4. I

    Acquired a 'bricked' DS-2CD6362F-IVS

    I do indeed, thank you - I found the post with the pins, I already have a USB to TTL from flashing/unbricking various DSL modems/routers. Although the aforementioned post says 1.25mm? EDIT: and I just found a post from you saying to ignore that post: "But - ignore the link in that post to the...
  5. I

    Acquired a 'bricked' DS-2CD6362F-IVS

    Thanks for the reply - it is I believe, yes, 6MP fisheye. I think my only hope is being able to initiate the TFTP from the camera itself (which I see someone else did), or flashing over the serial connection itself (if this is possible?). As it stands, it makes no attempt to fire out the...
  6. I

    Acquired a 'bricked' DS-2CD6362F-IVS

    I think the camera I have is in a similar state to Karol P's from the unbricking thread, with a packet dump I do not see any attempts by the camera to reach out to 192.0.0.128, although it pings briefly which is the reason for it learning the ARP, but then goes silent. Have tried restarting it...
  7. I

    Acquired a 'bricked' DS-2CD6362F-IVS

    Haha indeed - it felt very much 'my friend...' as I was typing it!
  8. I

    Acquired a 'bricked' DS-2CD6362F-IVS

    Hi there, I've acquired what I assume to be a bricked DS-2CD6362F-IVS, it seems to be a Chinese grey import (CH in the Serial number signifies this I believe?). Have read as much as I can from this forum, and tried a few things, but I'd just like to know peoples thoughts. I have no idea...
See more
Top Bottom