Recent content by hunternm

  1. H

    Software that supports Lorex wireless cameras and flood light cameras

    I have a Lorex NVR with 7 wireless cameras and recently also purchased a Lorex floodlight camera and 2 wireless cameras. The Lorex NVR can detect those wireless cameras but can not add them. I searched Lorex website and seems a Fusion NVR would work with them. However, since these wireless...
  2. H

    Best way to use Lorex NVR?

    Thanks for your reply. can you explain more about "ensure that you are correctly configuring the camera settings and that the IP addresses align with your network setup. ". The cameras are factory reset and I make sure I can get to the webUI of the cameras. So the IP is correct and I assume...
  3. H

    Review- EmpireTech IPC-T54IR-ZE-S3 4mp Varifocal Turret

    Thanks. I was able to factory reset the camera and add it back to the NVR.
  4. H

    How to add a camera to Lorex NVR via a POE switch

    so all of my cameras are plugged to the NVR directly and I am planning to add 2 cameras that are plugged into a POE switch that is on the same subnet as the LAN port of the NVR. These 2 cameras are also Lorex and were bought together with other cameras along with the NVR in a package so there...
  5. H

    Best way to use Lorex NVR?

    ok, it is always a pain to add cameras to my Lorex LNR616 NVR. Once the cameras are added usually it works fine. This is currently how I set it up. The NVR is in a location that close to most of the cameras but not possible to connect a keyboard and monitor to it so I just use the Lorex cloud...
  6. H

    Review- EmpireTech IPC-T54IR-ZE-S3 4mp Varifocal Turret

    My Lorex NVR lost connection to the Z4E camera. I tried to access the webUI of the camera but was denied due to wrong password which is weird. I guess right now I need to find a way to factory reset the camera and re-add it back to the NVR. I tried to use Dahua config tool as there is an...
  7. H

    Camera placement question

    I am trying to figure out the best location to install my cameras. I am planning to install 1-2 cameras to cover the front. In the picture I marked the potential locations of my first camera. At first i was thinking of installing the 2 cameras at location B next to each other with one facing...
  8. H

    Review- EmpireTech IPC-T54IR-ZE-S3 4mp Varifocal Turret

    Z4E. I connected my laptop to the NVR and was able to get to the camera GUI and zoom in further. Still trying to adjust the focus and find the sweet spot for read the license plate. Making some progress. thank you all for your help.
  9. H

    Review- EmpireTech IPC-T54IR-ZE-S3 4mp Varifocal Turret

    Thanks a lot. I got in the GUI with IE mode in Edge. I was able to access my other cameras by clicking the web icons. Then a new tab is opened with 192.168.100.70:10081 . 192.168.100.70 is my NVR IP. the port for other cameras will be 10082, 10083 .... However, the address in the new...
  10. H

    Review- EmpireTech IPC-T54IR-ZE-S3 4mp Varifocal Turret

    The light pole is about 50 feet away from the camera.
  11. H

    Review- EmpireTech IPC-T54IR-ZE-S3 4mp Varifocal Turret

    I clicked the zoom in button in the picture but did not seem to do anything.
  12. H

    Review- EmpireTech IPC-T54IR-ZE-S3 4mp Varifocal Turret

    Thanks all the help. Eventually got it show up in the NVR. However, I can not zoom in to my preferred position. it is motorized varifocal so should be able to adjust it remotely. Can anyone guide how to do it within Lorex NVR?
  13. H

    Review- EmpireTech IPC-T54IR-ZE-S3 4mp Varifocal Turret

    thanks. can you share the instructions or a link how to do a factory reset on this camera?
  14. H

    Review- EmpireTech IPC-T54IR-ZE-S3 4mp Varifocal Turret

    ok, I found an old Axis POE injector and I was able to find the camera in the NVR. However the NVR can not pull any video or device setting from the camera. Do I have to set a different port or a username and password to get it work? Port 37777 was filled in automatically when the camera was...
  15. H

    Review- EmpireTech IPC-T54IR-ZE-S3 4mp Varifocal Turret

    Thanks wittaj for your reply. it is a 16 channel NVR and I am only using 4 so i do not think it is a capacity issue. I do not have a 12V power plug but I can get a POE injector to test as long as someone can tell me what type of POE injector works with this camera.
See more
Top Bottom