Recent content by glennbot

  1. G

    PoE on new DS-2CD2332-I single camera installation.

    OK - I can confirm the HikVision DS-2CD3332-I will only work on 48V. (Tried 24v and 36V but it doesn't power up) The wiring pinout for the RJ45 are (+) on pins 4/5 and (-) on 7/8 I ordered a all-in-one 48V 0.5A PoE Injector/Power Adapter from eBay which should do the job.
  2. G

    PoE on new DS-2CD2332-I single camera installation.

    1. I don't have a POE injector - I will buy one later. 2. I don't want to run a 2-Core power cable out to the camera - that's why I bought a POE camera.
  3. G

    PoE on new DS-2CD2332-I single camera installation.

    OK, So basically you're saying all I need to do is supply 48V to (+) Pin 4/5 and (-) on 7/8 and I'm in action? I take it a smaller 24V voltage won't work? I would have thought they would use a DC-DC circuit converter inside? Thanks Again.
  4. G

    PoE on new DS-2CD2332-I single camera installation.

    Hi, Can anyone tell me what the RJ45 POE pinout is on the DS-2CD2332-I camera? POE 802.3af has Standards A and B. Is it possible to splice into a cat5 cable and insert the 12V to power the camera? I tried (+) on pins 4/5 and (-) on 7/8 but it doesn't seem to work? Thanks.
See more
Top Bottom