Recent content by gazzaman2k

alastairstevenson watchful_ip thankyou very much you 2 have been great help, the cams are now inactive and still in english firmware, still no clue the the password but now the plug and play works on the nvr so hopefully they will have adpoted the verify key from the nvr brilliant work guys...

it comes up with a few options U-Boot 2010.06-277604 (May 04 2017 - 19:53:45) NAND: 128 MB Hit Ctrl+u to stop autoboot: 0 HKVS # erase Please input the erase area,support: erase env/sysflg/sys0/sys1/app0/app1/cfg0/cfg1/log/all HKVS #

not much is happening just says HKVS # setenv bootargs console=ttyAMA0,115200 init=/bin/sh single Unknown command 'setenv' - try 'help'

▒ U-Boot 2010.06-277604 (May 04 2017 - 19:53:45) NAND: 128 MB Hit Ctrl+u to stop autoboot: 0 HKVS # printenv bootargs=console=ttyAMA0,115200 bootcmd=loadk bootdelay=3 baudrate=115200 netmask=255.255.255.0 bootfile="uImage" ipaddr=192.0.0.64 serverip=192.0.0.128 stdin=serial stdout=serial...

ive made the ttl cable and have coms in putty i figured out yo have to power the cam seperatly i can stop the boot process and i see options for erase bootloaders etc... what do i do from here? i cant seem to find any firmware for this camera ive been searching online for hours

do you have to plug in poe power to camera when doing this or does the usb power it on its own? reason being im not getting anything from putty when usb only

no they stayed on the 169.254.98.x or 169.254.115.x ranges i have that PL2303TA adapter from arduino programming

they are chinese hacked english versions :(

no they were static ip on a poe switch home network, they were not connected to a nvr but used to save to a nas drive on the network. v5.4.52 build170572

thats where the problem is that the default password has changed, and i dont know it :( ive emailed the seller on ali express but i hold no hope as they were purchased back in 2017, my last set i had in 2018 default was vik12345 but ive tried so many default grey market passwords and still...

hi alastair the ip range used to be 192.168.0.x and static pc address when i plugged into the nvr it has now moved the ip to 169.254.115.x which is not the 192.168.254.x poe domain on the nvr so i have no idea whats its done to them, i can log into the loggin page on my pc if using a poe switch...

hello i have 2 DS-2CD3345-I which i plugged into my nvr after being on a poe switch it has changed the passwords and i can no longer log into them, could someone help me please they are v5.4.52 version and the password reset tool just doesnt seem to work, ive tried hik12345, 12345, vik12345...