Thank you very much for your answer ! I will indeed try, I always had the feeling that the diet was too weak. They should not then say that it could be used. Thanks again
Currently no, I have tried a lot of things, in the NO and NC port, I tested with thin and thicker cable, and I also tested with a strip led that turns on and off when I 'activates the unlocking of the door. I really have the feeling that the power of the door station is not enough to generate...
Hello, I come back with my videophone problem because I arrive at the time of installing it in the new house.
I understood my problem because I did a test with a led. The door station sends a direct current to the electric strike. When I press the button to open the door, the door station relay...
I tried again but I don't understand that it doesn't work. The wiring is therefore good. Do I have to activate something in hikvision?
I do the test as follows: the strike is therefore hard and does not open. I press the doorbell and then the screen key and the device tells me that the door is...
Thank you for your message, so I could according to you reverse the wires + and - in order to test if this changes anything on the electric strike? If not, does the connection seem coherent to you on the doorbell?
Thank you !
Hello, I bought a HIK vision video kit but I can't get my electric strike to work with the DS-KD8003-IME2.
I attach my photos, I followed a connection found on the forum but it does not work. Guess when I hit the screen unlock key, and the device says the door is open, there should be no...
Hi Mafiosi, I don't know if you speak French or English, but I have a little question for. I am exactly in the same situation than you with my 2cd2632is (from china,...). I made the terrible mistake to firmware her, and now, impossible to restore the cam, and same when I have the completed...
Bonjour Il Mafioso, j'ai fait la même erreur que vous en voulant upgrader ma camera 2cd2632 is. (de chine avec l'étiquette 5.3.0,...)
Je lutte depuis 3 jours mais j'ai exactement le même soucis que vous, elle fait le transfert qui s'affiche completed, mais je n'ai jamais accès à la caméra dans...
Ok I just make the test by putting directly the camera with the 12v adaptater on the same switch (a simple d-link switch no POE) with the computer.
SADP did not detect my camera, but when I put an other camera with this 12v adapter + the same rj45, she was detected after 10 seconds.
I think my...
Thank you whoslooking for your message.
I try this dance with the ip adress
The master problem that I have is that I can't arrived to the page with login and password.
If i used the chinese 5.3.0 tu upgrade with tftp (IPC_R0_CN_STD_5.3.0_150513), I never had the message "completed". I have the...
Thank you very much for your message !
I just installed the SADP version (the new one). It detects well my other cameras that are functional, but not the one with which I made the update.
What I do not understand is that I use the firmware version that is noted on the camera. Only the version...
Hi everybody,
I come here in desperation after going back to the internet, and testing everything I could do.
I own 3 cameras 2CD2632F-IS. I made the serious mistake of updating the firmware on a camera, and now it no longer works.
Here are the characteristics of the camera:
DS-2CD2632F-IS...