Recent content by fido
-
F
The Chinese camera does not start up
If I have a second such camera, can I download the software from it and upload to the one that does not work. I will work at night.- fido
- Post #16
- Forum: IP Cameras
-
F
The Chinese camera does not start up
But how to connect it? How to upload and where to get the firmware? I have something like that. Slightly dirty, the camera worked until the end. After uploading the firmware, it stopped starting.- fido
- Post #12
- Forum: IP Cameras
-
F
The Chinese camera does not start up
Unfortunately, there are no other logos. This is what the PCB looks like from the inside. I have another, the same, maybe it would be possible to download the firmware. Buying a new one will definitely be there. I just want to play with this one.- fido
- Post #9
- Forum: IP Cameras
-
F
The Chinese camera does not start up
The problem was, the camera was unstable. It seems to me that there is some way to save the camera, for example through the J13 connector, but I might be wrong. No contact with this person. I received the soft a few years ago from a Chinese.- fido
- Post #7
- Forum: IP Cameras
-
F
The Chinese camera does not start up
The camera is already a few years old and it was working normally. Now the problems started and I wanted to upload newer software. I had the software from a Chinese. I used to upload this software to a similar camera and there was no problem. How to check the default address? The router does...- fido
- Post #4
- Forum: IP Cameras
-
F
The Chinese camera does not start up
Hello. I got a camera like in the picture. Firmware from files has been uploaded to it 1.kernel.bin 2.rootfs.bin 3.user.bin Now only the red LED is on and after connecting to the router it is orange and the green LED is blinking at the LAN connector. As you can see in the photo, the LEDs are lit...- fido
- Thread
- Replies: 16
- Forum: IP Cameras