Recent content by elkypro

  1. elkypro

    IPC-T2431T-AS loryta camera from andy having issued being recognized by my NVR.

    Unfortunately, i till I haven't updated the nvr firmware in at least 5 years. Amcrest stopped supporting it around 18 or so. In that time I've updated all the cameras to ones bought from Andy.
  2. elkypro

    IPC-T2431T-AS loryta camera from andy having issued being recognized by my NVR.

    It finally worked! Wow..... multiple days of messing with this. What I did was I initialized it directly through router. After I unplugged it and plugged in nvr if wouldn't populate it. I repeated this a few more times before I tried changing the ip address in the camera. When it gave me...
  3. elkypro

    IPC-T2431T-AS loryta camera from andy having issued being recognized by my NVR.

    Ok, I was able to log into the camera directly by way of the router. I initialized it.
  4. elkypro

    IPC-T2431T-AS loryta camera from andy having issued being recognized by my NVR.

    I've tried to hook up to the computer but im afraid im just not technically inclined enough to do so. It's a newer laptop, windows 11. But I've never used anything after windows 7 before. Let alone trying to change ip addresses, etc...on a computer. I plug the camera to the Injector, plug...
  5. elkypro

    IPC-T2431T-AS loryta camera from andy having issued being recognized by my NVR.

    Yes, im using the same port 4. I've run into the pickiness of changing ports before lol. Thats what I thought as well, but the last 2 times I was able to initialize the camera I just unplugged the patch cable I was using indoors for a minute until the nvr screen went blank and then plugged...
  6. elkypro

    IPC-T2431T-AS loryta camera from andy having issued being recognized by my NVR.

    That may be a possibility but I've bought 11 cameras from Andy going back to 2018 after I ditched amcrest and this is the only one I've ever had an issue to get to populate in the device search. Yes, I've tried to search and manual add. The nvr does not even recognize that something is...
  7. elkypro

    IPC-T2431T-AS loryta camera from andy having issued being recognized by my NVR.

    I did exactly as you stated and the nvr did not populate the camera.
  8. elkypro

    IPC-T2431T-AS loryta camera from andy having issued being recognized by my NVR.

    Yes, both the camera and nvr are re-branded dahua. What I've been doing is plugging it into the nvr port to provide power then resetting it. I left the camera on all night and this morning the light was on. I reset it and heard the click right away. Still plugged in the nvr doesn't pick...
  9. elkypro

    IPC-T2431T-AS loryta camera from andy having issued being recognized by my NVR.

    Ok, so when I got home(camera indoors on table plugged in) the infrared light was on. Viewed the nvr populated list and camera was not detected. Did the 3 resets and waited about an hour. Red light was on and the camera was detected by the nvr. Logged into nvr web interface to initialize...
  10. elkypro

    IPC-T2431T-AS loryta camera from andy having issued being recognized by my NVR.

    I'll listen for the click. My nvr doesn't have link lights nor can I see the infrared come on except the once. Good ideas all around. Thanks for the info. Appreciate it
  11. elkypro

    IPC-T2431T-AS loryta camera from andy having issued being recognized by my NVR.

    I assume it will have power when plugged in but minus seeing the red infrared light how can one verify?
  12. elkypro

    IPC-T2431T-AS loryta camera from andy having issued being recognized by my NVR.

    Thank you!. I'll give it a shot tonight when I get out of work. Appreciate the insight as I'm not very tech savvy when it comes to ip addresses, subsets, etc...
  13. elkypro

    IPC-T2431T-AS loryta camera from andy having issued being recognized by my NVR.

    Does it need to be plugged in to do a reset? Or just hold it for 15 seconds regardless of its powered or not?
  14. elkypro

    IPC-T2431T-AS loryta camera from andy having issued being recognized by my NVR.

    Hello, To preface, I've bought all my newest cameras from Andy and this has been the only issue I've had so far. I apologize if this post is a bit wordy but wanted to give an accurate sequence of events. I have emailed Andy but I'm leaving on vacation in a day and was wonduring if anyone knew...
  15. elkypro

    IPC-T2431T-AS IPC-T2231T-ZS IPC-HX2XXX-Molec_MultiLang_PN_V2.820.0000000.28.R.210323.zip

    @EMPIRETECANDY Could you please upload this firmware again? I just purchased this camera. thank you
See more
Top Bottom