Recent content by eggsan

no experience with this particular camera, but if all your cameras were added using your own account, then all 6 cams will be available for accessing remotely. I understand you need to create a separate account for only one camera (you may need to factory reset one camera). The problem is that...

Yes, let us know as well. It looks like you are stuck with this camera. For security reasons, Hik will never help you unlinking the account

the audio sync will always be a problem, and it needs to be dynamically adjusted depending on the speaker (speech or music) . As radeon00 mentioned, better stick with the Atem Mini, but better use the PRO version. It will free your PC from the OBS streaming platform, add preview of all your hdmi...

But check with other residents. For sure they broke into other cars that night.

Wow. The problem is you need to wait until they vandalize a property, otherwise they will tell the authorities that were just exercising. Thanks God you have the video

actually, I don't think the cable company will help. First talk to the condo administration, on how the tenants access/or use to access the camera signal. If unknown, try visiting an apartment, and figure out how the signal (video cam) was received. If no cable box was needed in the past, maybe...

Is like creating your own dedicated channel (camera) to be combined with the signal of your cable company. In the old days, the analog signal was combined within the cable signal and decoded in a UHF (CH-68) channel to watch the video signal (camera). But with DTV tuners and some cable boxes...

as mecham56 noted, is a good idea to add extra tubing, (6+ inches below surface), starting at the distribution panel, ending strategically with a PVC weatherproof box. Extra care with corrugated tubing during the process of pouring the concrete, the extra pressure could damage the corrugated. To...

nice house. You still have plenty of time, but you may ask your Integrator to quote on Hikvision products, since drivers are already available to control Hik's NVR . Recently, C4 was purchased by SnapAV, in which Luma (Hik OEM) is their surveillance brand. The driver (interface) will work with...

If it got plastic melted, that looks like a bad scenario (high current rush). Somehow the water (conductive) created a short within the camera components (?). If you already tried connecting a 12v power supply, it could be a voltage regulator, etc. With so many micro-components, maybe is time to...

you must have an RF modulator to combine the cable signal with the outcome of the DVR. Maybe something is missing from the original setup

in my case, I always recommend and install Dahua security systems. In my experience, most of the problems are related to power outages. I always install a UPS (cable/network surge included) and even protect the NVR network connector. Are you the technician in charge of the repairs? Could you...

you mean two (2) non dahua IP cameras to be connected to your new NVR, not using the poe ports? If that is the case, check if the cameras are ONVIF. But if they are both poe enable, better connect directly to your poe NVR. Is actually more secure since is a switch with a different subnet. For...

In my case, I prefer Ubiquiti UAP series. The In-Wall is perfect for home environment

Cannot comment, non BI user. Other members report the following: https://ipcamtalk.com/threads/dahua-imou-camera-does-blueiris-support-it.47683/