i have tested with tinycam too (see my other post from june) But i guess now what the problem is! i have synology servers that record the camera`s. And that is high quality. So i think you can only watch on 1 device high quality with RTSP, and on other devices you can only see sub stream (RTSP)...
i have the vmeyesuper app installed on android. And have 4 top201 ip camera. And the settings in vmeyesuper are on main stream. But it is slowly. And have real time on. When i use sub stream, no problem. I have a octa core s912 and 3gb ddr3 ram. The proccesor is on 98% 1.26ghz And that is only...
Indeed, your laptop/pc must always be on 24/7
That`s why i have 3 synology servers. Before (2 years or so?) you had 1 license for the synology. Now it is 2.
i do now understand you, you want use the camera software built in. And you want send the recording of the camera to your synology. I go...
Yes it can, but without housing it is fragile. And with an old pc you can maybe put on blue iris. It is about $60 i guess. But first check the specs of the pc.
i see you have ordered it, i hope everything works out for you!
Please do normal. I just do my best to answer it. If you want use the standard software, and you are not flexible to try other programs, why you asked then? Very strange.
oh, on that way. you can use blue iris. it works very good. and they support top-201. also they have an app. i do not recommend the built in software/cms.
yes you need 2 port`s on the router, or use a switch i you have no more ports. on the recorder it only need 1 lan cable to the router. This camera will works outdoors if you set the port of the recorder open in the modem/router.
i have too synology servers with top-201 camera`s
Just do this:
go to surveillance station
add ip camera
ip adres camera
port: 8899
brand: onvif
model: generic onvif
username
password
DONE
i have with detection (surveilance station) sensivity: 99 and the other setting 3
but that is just...
add camera:
Vmeyesuper
device list
+
ip: ip of the camera
user name
password
channel 1
ok
back
live preview
you see now the camera, otherwise you click on the + and then you can select camera, you see camera01
simple as that! i have add user in CMS because it not working with the ADMIN...