Recent content by Dr.Berciu

  1. D

    Abnormal shutdown 2xHikvision DS-2DE2C400SCG-E(F1)

    The camera works fine, only if accessed through the NVR, not standalone. It is connected via POE from a POE switch, but it does not reboot if connected to a power source and accessed through the NVR. As said before, I did install it via POE injector and still kept rebooting, but after being...
  2. D

    Abnormal shutdown 2xHikvision DS-2DE2C400SCG-E(F1)

    Hello, The only solution I could find was to connect the camera via NVR. So I had to buy a new NVR with more channels and a POE switch. This cost me over 200$ unfortunately. If I access the camera via NVR, no issue whatsoever. Take care
  3. D

    Abnormal shutdown 2xHikvision DS-2DE2C400SCG-E(F1)

    Thank you again for your reply. I checked everything that has to do with the local network. I tried them on another router, on a different connection. I only left the camera plugged in the router, nothing else. I am a Technical Support Level 3 in telecom, so I pretty much checked everything...
  4. D

    Abnormal shutdown 2xHikvision DS-2DE2C400SCG-E(F1)

    I changed the cable with a brand new CAT6 full copper wire. After 1-2 hours, abnormal shutdown show in logs :(
  5. D

    Abnormal shutdown 2xHikvision DS-2DE2C400SCG-E(F1)

    Understood. Will try this tomorrow and reply. Thank you.
  6. D

    Abnormal shutdown 2xHikvision DS-2DE2C400SCG-E(F1)

    Thank you for your reply. But why would it work just fine via a POE NVR, on the same cable?
  7. D

    Abnormal shutdown 2xHikvision DS-2DE2C400SCG-E(F1)

    Hi, I am a new member and I became so frustrated with my issue that I had to write in order to receive some advice. I bought 2x DS-2DE2C400SCG-E(F1) from a local provider (best in Romania). After I installed them, shortly after, a couple of days, they started to abnormal shutdown (can be seen...
See more
Top Bottom