Recent content by CyberVoyou

  1. C

    Need firmware 3.3.4 for DS-7608N-E2/8P

    I'll will explain this ... If you don't have a POE switch to be able to change the IP address of your CAM, by default those camera has the IP 192.168.1.64... My others CAM got detected PLUG N PLAY and it doesn't matter to have or not a POE switch to change their IP ... Firmware 5.3.3 doesn't...
  2. C

    Need firmware 3.3.4 for DS-7608N-E2/8P

    It all fixed already thanks
  3. C

    Need firmware 3.3.4 for DS-7608N-E2/8P

    Great news! I finally make it works. I put the internal NIC address at 192.168.1.254 in the NVR and I have configured the CAM manually and it works. Thanks all for your supported, the 3.3.4 from the Chinese website is the solution. BY THE WAY, I didn't change anything on the firmware, i didn't...
  4. C

    Need firmware 3.3.4 for DS-7608N-E2/8P

    I have downloaded the Firmware with Firefox on the Chinese Website and I did the upgrade to 3.3.4! Finally, however my CAM DS-2CD2135-IF (Firmware 5.3.3) still not connect on the NVR ... Any ideas? The webgui says (after I did manually configured the camera) Network Abnormal ...
  5. C

    Need firmware 3.3.4 for DS-7608N-E2/8P

    From the WEBGUI interface I got "Upgrade Failed" .... From the TFTP Server, the transmission starts correctly, the connection works fine, the DIGICAP.DAV is transmit .... and SUDDENLY the NVR rebooted with a BIP without completed the upgrade and I'm still at 3.3.2 I know the HIKTOOLS to change...
  6. C

    Need firmware 3.3.4 for DS-7608N-E2/8P

    Yep im aware of this site. I did try the mention firmware. But even through the gui or with the tftp server the firmware dont wont to be upgraded ...
  7. C

    Need firmware 3.3.4 for DS-7608N-E2/8P

    Hi, Thanks for the answer. I'm well known informed about Hikvision and all the firmware world actually... I really need the file digicap.dav (firmware 3.3.4) for my NVR cause the next camera (firmware 5.3.3) wont connect at all to the NVR even manually. Are you able to post your 3.3.4...
  8. C

    Need firmware 3.3.4 for DS-7608N-E2/8P

    Hi, I have a DS-7608N-E2/8P (!Not DS-7608NI-E2/8P) and I need to upgrade it to version 3.3.4. Is there anyone that have this firmware it will very appreciated. Regards
See more
Top Bottom